15
To Learn More...
How to Use /
To
Learn More...
Operation mode
iAUTO-X :
Provides fast cooling operation which is ideal on a hot day.
COOL
:
Provides ef
fi
cient comfort cooling to suit your needs.
DRY
:
Operates at low fan speed for a gentle cooling operation.
Energy saving temperature setting
You may save energy when operating the unit within the recommended temperature range.
COOL:
26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.
Air
fl
ow direction
In COOL/DRY mode:
The horizontal
fl
ap is
fi
xed at middle position setting.
Once the temperature is achieved, the horizontal
fl
ap swings up/down automatically.
In iAUTO-X mode:
The horizontal
fl
ap swings up/down automatically at a predetermined position.
Once the temperature is achieved, the horizontal
fl
ap is
fi
xed at upper position.
In COOL/DRY/iAUTO-X mode:
The horizontal
fl
ap swings up/down automatically.
Auto restart control
When power is resumed after a power failure, the operation will restart automatically with the
last operation mode and air
fl
ow direction.
• This control is not applicable when TIMER is set.
nanoe™X
fi
lter deactivation
Depending on the unit’s accumulated operation time, the nanoe™X may be activated only
once a day after the unit is turned off standby mode. During the nanoe™X
fi
lter deactivation
operation, the
fl
ap will open slightly with low fan speed operation for 2.5 hours if the unit was
in COOL/DRY mode, and 2 hours if the unit was in nanoe™ TECHNOLOGY, before the unit
is turned off. This is to remove viruses/bacteria from the surroundings.
The
fi
lter deactivation operation is complete when the fan stops and the
fl
ap closes. Do not
turn off the power supply during this operation. After a power failure, this operation will not
resume.
Operating conditions
Use this air conditioner in the temperature range indicated in the table.
Temperature °C (°F)
Indoor
Outdoor
DBT
WBT
DBT
WBT
COOL
Max.
32 (89.6)
23 (73.4)
46 (114.8)
26 (78.8)
Min.
16 (60.8)
11 (51.8)
16 (60.8)
11 (51.8)
DBT: Dry bulb temperature, WBT: Wet bulb temperature
English
