Panasonic CS- U12WKY Series, Operating Instructions Manual, Page: 6 / 8

POWERFUL, SLEEP, TIMER etc.
function will not resume after power failure.
If AUTO is set, the louver swings up/down
automatically.
52 30
TIMER
OFF ON CANCEL
• To cancel ON or OFF timer, press .
• If timer is cancelled manually or due to power
failure, you can restore the timer again by
pressing or then wait for “5” sec.
• The nearest timer setting will be displayed and
will activate in sequence.
• When ON Timer is set, the unit may start
earlier (up to “15” minutes) before the actual
set time in order to achieve the desired
temperature on time.
ON OFF
CANCEL
11
Select ON or OFF
timer
Set the time
Confirm
Example:
OFF at 14:00
Press the OFF
button.
OFF
OFF OFF OFF OFF OFF
•
Wait for “5” second to set timer. •
Press OFF button again to
increase timer time in step
of “10” minutes. •
Press the button to turn on. •
10
AUTO - For your convenience
COOL - To enjoy cool air
DRY - To dehumidify the environment
Unit run with optimised settings.
You can change the temperature according to
your comfort.
To reduce power consumption during COOL mode,
use curtains to screen off sunlight and outdoor heat.
Unit operates at auto fan speed to give a gentle
cooling operation.
FAN - To operate Air-Con in “Fan Only” mode
* Indoor unit temp. display will show set temp. for
AUTO,COOL & DRY mode and room temp. for FAN
mode.
Only indoor unit fan operates as per remote settings.
Outdoor is OFF, so no cooling acheived.
Provides air circulation in the room.
“SL” will be displayed on Remote
The unit is turned off after “8” hours.
This operation provides you with a comfortable
environment while sleeping by gradually increase
the set temperature 1 °C after “3” hours operation.
This operation is to achieve faster cooling. •
POWERFUL
The unit displays set
temperature. •
Press to turn ON/OFF
the hidden display.
( 6 / 8 )
A C I 2 P R 0 9 2 0 1
SLEEP POWER
POWERFUL TIMER
‘CL’ will be displayed on the remote controller.
While ‘CL’ is diplayed, all other functions of the
remote controller will be disabled, except for
ON/OFF button.
Press CLEAN button again to cancel.
CLEAN
To clean dust on evap. coil of
the Air-Conditioner Unit
Press‘LOCK’ for 5 seconds to lock/unlock
remote keypad.
When keypad is lock, remote display show Lo
LOCK
when any button is pressed.
This operation stops automatically after 1 hour.
•