6
CARE & CLEANING
CARE & CLEANING
Remove
Remove
WASHING INSTRUCTIONS
WASHING INSTRUCTIONS
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
INDOOR UNIT
INDOOR
UNIT
Wipe the unit gently with a
soft, dry cloth.
HINTS
HINTS
• Clean the
fi
lter regularly for best performance and to
reduce power consumption.
• Please consult your nearest dealer for seasonal
inspection.
FOR SEASONAL INSPECTION AFTER EXTENDED
FOR SEASONAL INSPECTION AFTER EXTENDED
NON-USE
NON-USE
• Checking of remote control batteries.
• No obstruction at air inlet and air outlet vents.
• After 15 minutes of operation, it is normal to have the
following temperature difference between air inlet and air
outlet vents:
Cooling:
≥
8°C
Heating:
≥
14°C
NON SERVICEABLE CRITERIAS
NON SERVICEABLE CRITERIAS
TURN OFF POWER SUPPLY AND UNPLUG then CALL
Authorized Distributor under the following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the remote control.
• Water leaks from Indoor unit.
• Circuit breaker switches off frequently.
• Power cord becomes unnaturally warm.
• Switches or buttons are not functioning properly.
FOR EXTENDED NON-USE
FOR EXTENDED NON-USE
• Activate heat mode for 2~3 hours to thoroughly dry the unit.
• Turn off the power supply and unplug.
• Remove the remote control batteries.
SUPER ALLERU-BUSTER FILTER
SUPER
ALLERU-BUSTER
FILTER
• Vacuum the
fi
lter whenever necessary.
• Replace the
fi
lter every 10 years or
purchase the replacement
fi
lter if it is
damaged.
Part no.: CZ-SA16P
AIR FILTERS
AIR
FILTERS
• It is recommended to clean the air
fi
lters
once every 2 weeks.
• Wash/rinse the
fi
lters gently with water to
avoid damage to the
fi
lter surface.
• Dry the
fi
lters thoroughly under the shade,
away from
fi
re or direct sunlight.
• Replace any damage
fi
lter.
Remove
Remove
IONIZER
IONIZER
Clean with cotton bud.
FRONT PANEL
FRONT
PANEL
Raise and pull to remove.
Wash gently and dry.
ALUMINIUM FIN
ALUMINIUM
FIN
CAUTION
•
Switch off the power supply and unplug before cleaning.
•
Do not touch the aluminium
fi
n, sharp parts may cause injury.
