8.4.1.1. Cut the pipes and the cable
•
•
•
•
Use the accessory piping kit or pipes purchased locally.
•
•
•
•
Measure the distance between the indoor and the outdoor
unit.
•
•
•
•
Cut the pipes a little longer than measured distance.
•
•
•
•
Cut the cable a 1.5m longer than the pipe length.
Model
Pipe size
Gas side
Liquid side
CS-SA18CKP/ CU-
SA18CKP5
1/2"
1/4"
8.4.1.2. Remove burrs
•
•
•
•
Remove burrs from cut edges of pipes.
•
•
•
•
Turn the pipe end down to avoid the metal powder entering
the pipe.
Caution
If burrs are not removed, they may cause a gas leakage
8.4.1.3. Flaring the pipe
•
•
•
•
Insert the flare nuts, mounted on the connection ports of
both indoor and outdoor unit, onto the copper pipes.
•
•
•
•
Fit the copper pipe end into the bar of flare tool about 0.5-
1.5mm higher. (see Fig.A)
•
•
•
•
Flare the pipe ends.
Fig.A
8.4.1.4. Tape the flaring portion to
protect it from dust or damage.
8.4. Piping and drainage of indoor unit
8.4.1. Preparation of piping
27
CS-SA18CKP / CU-SA18CKP5
Summary of Contents for CS-SA18CKP
