Panasonic CS-S9NKR, Service Manual

Page: 51 / 124

51
11.4.2 Horizontal Airflow
•
Automatic horizontal airflow direction can be set using remote control; the vane swings left and right within the
angles as stated below.
Operation Mode Vane angle (°)
Cooling and Soft dry 68 ~ 112
•
Manual horizontal airflow direction can be set using remote control; the angles of the vane are as stated below
and the positions of the vane are as Figure 2 above:
Pattern 1 2 3 4 5
Airflow Direction
Patterns at Remote
Control
Vane Angle (°) 90 68 78 102 112
11.5 Quiet Operation (Cooling Mode/Cooling Area of Dry Mode)
•
Purpose
o
To provide quiet cooling operation compare to normal operation.
•
Control condition
o
Quiet operation start condition
ƒ When “QUIET” button at remote control is pressed twice.
QUIET/ECONOMY LED illuminates (low intensity).
o
Quiet operation stop condition
ƒ When one of the following conditions is satisfied, quiet operation stops:
•
QUIET button is pressed again.
•
Stop by OFF/ON switch.
•
Timer “off” activates.
ƒ When quiet operation is stopped, operation is shifted to normal operation with previous setting.
ƒ When fan speed is changed, quiet operation is shifted to quiet operation of the new fan speed.
ƒ When operation mode is changed, quiet operation is shifted to quiet operation of the new mode.
ƒ During quiet operation, if timer “on” activates, quiet operation maintains.
ƒ After off, when on back, quiet operation is not memorised.
•
Control contents
o
Fan speed is changed from normal setting to quiet setting of respective fan speed.
This is to reduce sound of Hi, Me, Lo for 3dB (some models more than 3dB).
o
Fan speed for quiet operation is reduced from setting fan speed.
o
Outdoor fan speed is change to QLo (S24NKR & S28NKR).
o
Compressor frequency reduced.