manualshive.com logo in svg

Panasonic CS-S12MKQ, Service Manual

Share
Download
Panasonic CS-S12MKQ Service Manual Download Page 1

© Panasonic HA Air-Conditioning (M) Sdn. Bhd. 2010. 
Unauthorized copying and distribution is a violation of law.

 

Order No: PHAAM1012009C3 

 

 
 

Indoor Unit 

Outdoor Unit

 

CS-S9MKQ 

CS-S12MKQ 
CS-S18MKQ 
CS-S24MKQ 
CS-S28MKQ 

CU-S9MKQ

CU-S12MKQ
CU-S18MKQ
CU-S24MKQ
CU-S28MKQ

 

 

 

 

 

PRECAUTION OF LOW TEMPERATURE 

In order to avoid frostbite, be assured of no refrigerant leakage during the installation or repairing of refrigerant circuit.

 

 

WARNING 

This service information is designed for experienced repair technicians only and is not designed for use by the general public. 
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. 
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to 
service or repair the products dealt with in this service information by anyone else could result in serious injury or death. 

Summary of Contents for CS-S12MKQ

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands