background image

32

Operation mode

AUTO :

The POWER indicator blinks at the initial stage.
The unit will select an operation mode every 10 minutes depending on the setting and room 
temperature.

HEAT :

The POWER indicator blinks at the initial stage. The unit will take some time to warm up.

COOL :

Provides ef

fi

 cient comfort cooling to suit your needs.

DRY

:

Operates at low fan speed for a gentle cooling operation.

Energy saving temperature setting

You may save energy when operating the unit within the recommended temperature range.

HEAT : 

20.0 °C ~ 24.0 °C / 68 °F ~ 75 °F.

COOL: 

26.0 °C ~ 28.0 °C / 79 °F ~ 82 °F.  

Air 

fl

 ow direction

In COOL/DRY mode:

The horizontal 

fl

 ap is 

fi

 xed at middle position setting.

Once the temperature is achieved, the horizontal 

fl

 ap swings up/down automatically. 

In HEAT mode:

If AUTO is set, the horizontal 

fl

 ap is 

fi

 xed at the predetermined position. 

In COOL/HEAT/DRY mode:

The horizontal 

fl

 ap swings up/down automatically.

Auto restart control

When power is resumed after a power failure, the operation will restart automatically with the last 
operation mode and air

fl

 ow direction.

• This control is not applicable when TIMER is set.

nanoe™X filter deactivation

Depending on the unit’s accumulated operation time, the nanoe™X may be activated only once a day 
after the unit is turned off standby mode. During the nanoe™X filter deactivation operation, the flap will 
open slightly with low fan speed operation for 2.5 hours if the unit was in COOL/DRY mode, and 2 hours 
if the unit was in nanoe™ TECHNOLOGY, before the unit is turned off. This is to remove viruses/bacteria 
from the surroundings.
The filter deactivation operation is complete when the fan stops and the flap closes. Do not turn off the 
power supply during this operation. After a power failure, this operation will not resume.

Operating conditions

Use this air conditioner in the temperature range indicated in the table.

Temperature °C (°F)

Indoor

Outdoor

DBT

WBT

DBT

WBT

COOL 

Max. 

32 (89.6)

23 (73.4)

46 (114.8)

26 (78.8)

Min. 

16 (60.8)

11 (51.8)

16 (60.8)

11 (51.8)

HEAT 

Max. 

30 (86.0)

-

24 (75.2)

18 (64.4)

Min. 

16 (60.8)

-

-5 (23.0)

-6 (21.2)

DBT:  Dry bulb temperature, WBT: Wet bulb temperature

To Learn More... 

Summary of Contents for CS-RZ9YKA









































Reviews: