Panasonic CS-RZ25TKR Operating Instructions Manual Download Page 9

9

English

See "To learn more..." for details.

How to use

Note

 , 

ECONOMY

 , 

 , 

ECONOMY

• Can be activated in all modes and can be 

cancelled by pressing the respective button 

again.

• Cannot be selected at the same time.

To set the timer

ON

OFF

TIMER

CANCEL

SET

CANCEL

2

1

3

1

Select ON or OFF 

timer

Example: 

OFF at 22:00

• Each time pressed:

Cancel

2

Set the time

3

Con

fi

 rm

• To cancel ON or OFF timer, press 

 

or 

 to select respective   or   then 

press 

.

• If timer is cancelled manually or due to 

power failure, you can restore the timer 

again by pressing 

 or 

 to select 

respective   or   then press 

.

• The nearest timer setting will be displayed 

and will activate in sequence.

• Timer operation is based on the clock set 

in the remote control and repeats daily 

once set. For clock setting, please refer to 

Quick Guide.

2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset 

times.

To switch between powerful/quiet

POWERFUL: 

To reach the preset temperature quickly

• This operation stops automatically after 20 minutes.

QUIET: 

To enjoy quiet operation

• This operation reduces air

fl

 ow noise.

ACXF55-11360_SM0717-0_EN.indd   9

ACXF55-11360_SM0717-0_EN.indd   9

13/6/2017   11:54:31 AM

13/6/2017   11:54:31 AM

Summary of Contents for CS-RZ25TKR

















Reviews: