14
To select operation mode
AUTO mode - For your convenience
•
During operation mode selection the power
indicator blinks.
•
Unit selects the operation mode according to the
indoor intake temperature and remote control
temperature.
HEAT mode - To enjoy warm air
•
In heat mode, it may take a while for the unit to
warm up.
COOL mode - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY mode - To dehumidify the environment
•
Unit operates at low fan speed to give a gentle
cooling operation.
To adjust vertical airflow
direction (5 options)
(Remote control display)
•
Keeps the room ventilated.
• In COOL mode, if AUTO is set, the louver swings
up/down automatically.
•
In HEAT mode, if AUTO is set, the horizontal
louver fix at predetermined position.
•
Do not adjust the louver by hand.
To optimize energy saving
•
Detecting human presence and activity, the unit
controls room temperature to save energy.
•
Press the ECONAVI button, the ECONAVI
indicator on the indoor unit lights up and the
ECONAVI indication is displayed on the remote
control display.
To set the timer
•
To turn ON the unit at a preset time. Set the
timer while the unit is OFF.
•
To turn OFF the unit at a preset time. Set the
timer while the unit is ON.
Press once to select timer.
Press repeatedly to set your desired
time.
Press once to confirm.
•
To turn ON and then turn OFF the unit at
preset time. Set the timers while unit is OFF.
•
To turn OFF and then turn ON the unit at
preset time. Set the timers while unit is ON.
Press twice to select timers.
Press / repeatedly to set your
desired time.
Press once to confirm.
•
Press the button again to cancel timer
operation.
•
The timer will also be cancelled when you
press button.
•
The timer indicator of indoor unit will light up
during timer operation.
•
When ON Timer is set, the unit may start
earlier before the actual set time in order to
achieve the desired temperature on time.
•
If timer is cancelled manually or due to power
failure, you can restore the timer again by
repeating steps above (once power is resumed).
SELECT
SET/CANCEL
A
B
3
3
3
1
1
1
2
2
2
Operation conditions
Use this air conditioner under the following temperature range.
Temperature(°C)
Indoor
Outdoor
*
DBT
*
WBT
*
DBT
*WBT
COOLING
Maximum
32
23
43
26
Minimum
16
11
16
11
HEATING
Maximum
30
-
24
18
Minimum
16
-
-5
-6
DBT: Dry bulb temperature
WBT: Wet bulb temperature
F568623(F568899)-en.indd 14
2013-11-5 15:43:38