Panasonic CS-NE12MKE, Operating Instructions Manual

Page: 6 / 40

6
REMOTE CONTROL
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C (Not applicable for FAN
mode).
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20°C ~ 24°C.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3
TO SELECT OPERATION MODE
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
• Unit may stops warm air supply for deice. The deice
indicator ON during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To circulate air in the room
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects operation mode every 30 minutes according
to temperature setting, outdoor and room temperature.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST VERTICAL AIRFLOW DIRECTION
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position.
Maximum
distances: 8m
INDICATOR
PATROL SENSOR (Blue)
POWER/DEICE
(Green/Blue)
TIMER
(Orange)
QUIET
(Orange)
POWERFUL
(Orange)
(Blue)
+8/10°C HEAT
(Green)
FAN
SPEED
AIR
SWING
QUIET
POWERFUL
FAN SPEED
AIR SWING
PATROL
+8/10°C
HEAT
MODE
TEMP
OFF/ON
TIMER
SET
CANCEL
ON
OFF
1
2
3
SET CHECK
CLOCK
RESET
AC
RC
AUTO
HEAT
COOL
DRY
FAN
HEAT
+8/10°C
4
5
2
10
3
9
11
12
14
Remote
Control display
13
7
8
1
6