manualshive.com logo in svg

Panasonic CS-MC125KE, Service Manual

Share
Download
Panasonic CS-MC125KE Service Manual Download Page 55

AIR SW

ING

TIM

ER

CLO

CK

1

2

3

COOL

MODE

ECONOMY

FAN SPEED

AUTO

MANUAL

ON

OFF

SET

CANCEL

SLEEP

PO

W

ERFUL

OFF/ON

●

Economy or Powerful Mode

■

Operation details

Cover
is closed

Economy operation

Powerful operation

Cooling/Soft Dry

Airflow volume

Super High

Airflow volume

Low (on and off)

Economy Mode
To save electrical power consumption.
However, please use this mode when the room have
reached your desired temperature.
•

Press ECONOMY

*

Economy indicator (Green) on indoor unit lights
up.

•

Press once more to cancel this operation.

Powerful Mode
To obtain the setting temperature quickly.
•

Press POWERFUL

*

Powerful indicator (Orange) on indoor unit lights
up.

*

Powerful mode will operate for 15 minutes only.

•

To cancel this operation, press once more.

Temperature

3°C lower than set

temp.

Temperature

0.5°C higher than set

temp.

Economy and Powerful operation cannot be selected simultaneously.

*

•

The changes of the temperature and airflow volume are automatic.

•

The remote control display remain unchanged.

•

If sleep button or operation mode button is pressed, economy or powerful operation is cancelled.

•

During         -Air circulation operation, the powerful and economy operation are not available.

•

During Economy mode, indoor fan operates on and off at Low speed.

FAN

55

CS-MC95KE CU-MC145KE / CS-MC95KE CU-MC185KE / CS-MC95KE CU-3MC205KE / CS-MC125KE CU-MC245KE / CS-MC76KE / CS-MC126KE CU-MC196KE

Summary of Contents for CS-MC125KE
































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands