Panasonic CS-LV7SKA, Operating Instructions Manual

Page: 12 / 16

12
How to use
Auto OFF/ON button
Use when remote control is
misplaced or a malfunction occurs.
Raise the front panel:
• To use in AUTO mode, press the
button once.
• To use in COOL mode, press and
hold the button until 1 beep is
heard, then release.
• Press the button again to turn off.
Remote control receiver
and indicator
POWER
TIMER
nanoe-G
POWERFUL/QUIET
(Green)
(Orange)
(Blue)
(Orange/Green)
AIR CONDITIONER
OFF/ON
ON
OFF
SET
CANCEL
1 2 3
TIMER
MODE
TEMP
MODE
POWERFUL/
QUIET
AIR SWING
FAN SPEED
nanoe-G
SLEEP
SET RESET CLOCK
OFF/ON
ON
OFF
SET
CANCEL
1 2 3
TIMER
TEMP
CLOCK
Remote control display
Press and hold for
approximately
10 seconds to show
temperature setting
in °C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
nanoe-G
To purify the air
nanoe-G
• nanoe-G starts automatically when the unit is turned on
with
OFF/ON
.
• Can be activated even when the unit is turned off. In this
condition, the unit will operate as a fan with AUTO fan
speed and fl ap swing.
To deactivate viruses/bacteria on the fi lter
nanoe-G
POWER
• After the unit is turned off, the nanoe-G in- fi lter
deactivation may activate up to 150 minutes. Turning on
the unit cancels this operation.
nanoe-G in-fi lter deactivation
Depending on the unit’s accumulated operation time,
nanoe-G in- fi lter deactivation may activate only once a
day after the unit turned off.
To remove the moisture left in the internal parts, the
fan will operate for 30 minutes with fl ap opened slightly.
This process only applicable when the unit is operated
in COOL/DRY mode before turned off. Then, nanoe-G
deactivates viruses/bacteria on the fi lter for 2 hours with
fan stopped and fl ap closed.
Do not turn off the power supply during this operation.
After power failure, this operation will not resume.
MODE To select operation mode
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once AUTO mode is selected, the unit will operate at
the standard setting temperature.
Room
temperature
Operation
mode
Standard setting
temperature
23 °C & above COOL 25 °C
Below 23 °C DRY 22 °C
• Press for “HI” to +2 °C or for “LO” to
-2 °C to the standard setting temperature.
COOL mode - To enjoy cool air
• Provides ef fi cient comfort cooling to suit your needs.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
SLEEP
To maximise comfort while sleeping
(CANCEL)
• This operation provides you with a comfortable
environment while sleeping. It will automatically adjust
the sleep pattern temperature during the activation
period.
• The indoor unit indicator will dim when this operation
is activated. This is not applicable if the indicator
brightness has been manually dimmed.
• This operation is incorporated with the activation timer
(0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with single timer or
twin timer. Sleep operation has the priority over OFF
timer.
• This operation can be cancelled by pressing the
respective button when the sleep timer reaches 0.0h.