background image

6

Prevent water leakage by ensuring drainage 
pipe is:

 

- Connected properly,

 

- Kept clear of gutters and containers, or

 

- Not immersed in water

After a long period of use or use with any 
combustible equipment, aerate the room 
regularly.

After a long period of use, make sure the 
installation rack does not deteriorate to 
prevent the unit from falling down.

Remote control

Do not use rechargeable (Ni-Cd) batteries. It 
may damage the remote control.

To prevent malfunction or damage of the 
remote control:
• Remove the batteries if the unit is not going 

to be used for a long period of time.

• New batteries of the same type must be 

inserted following the polarity stated.

Power supply

Do not disconnect the plug by pulling the cord 
to prevent electric shock.

Precaution for using R32 refrigerant

The basic installation work procedures are the same as 
conventional refrigerant (R410A, R22) models.

1. Installation (Space)

• Must ensure the installation of pipe-work 

shall be kept to a minimum. Avoid use 
dented pipe and do not allow acute bending.

• Must ensure that pipe-work shall be 

protected from physical damage.

• Must comply with national gas regulations, 

state municipal rules and legislation. Notify 
relevant authorities in accordance with all 
applicable regulations.

• Must ensure mechanical connections be 

accessible for maintenance purposes.

• In cases that require mechanical ventilation, 

ventilation openings shall be kept clear of 
obstruction.

• When disposal of the product, do follow 

to the precautions in #12 and comply with 
national regulations.
Always contact to local municipal offi ces for 
proper handling.

Safety precautions

2. Servicing
2-1. Service personnel

• Any qualifi ed person who is involved with 

working on or breaking into a refrigerant 
circuit should hold a current valid certifi cate 
from an industry-accredited assessment 
authority, which authorizes their competence 
to handle refrigerants safely in accordance 
with an industry recognised assessment 
specifi cation.

• Servicing shall only be performed 

as recommended by the equipment 
manufacturer.
Maintenance and repair requiring the 
assistance of other skilled personnel shall 
be carried out under the supervision of the 
person competent in the use of fl ammable 
refrigerants.

• Servicing shall be performed only as 

recommended by the manufacturer.

2-2. Work

• Prior to beginning work on systems 

containing fl ammable refrigerants, safety 
checks are necessary to ensure that the risk 
of ignition is minimised.
For repair to the refrigerating system, the 
precautions in #2-2 to #2-8 must be followed 
before conducting work on the system.

• Work shall be undertaken under a controlled 

procedure so as to minimize the risk of a 
fl ammable gas or vapour being present while 
the work is being performed.

• All maintenance staff and others working 

in the local area shall be instructed and 
supervised on the nature of work being 
carried out.

• Avoid working in confi ned spaces.
• Wear appropriate protective equipment, 

including respiratory protection, as 
conditions warrant.

• Ensure that the conditions within the area 

have been made safe by limit of use of any 
fl ammable material. Keep all sources of 
ignition and hot metal surfaces away.

2-3. Checking for presence of refrigerant

• The area shall be checked with an 

appropriate refrigerant detector prior to and 
during work, to ensure the technician is 
aware of potentially fl ammable atmospheres.

• Ensure that the leak detection equipment 

being used is suitable for use with fl ammable 
refrigerants, i.e. non sparking, adequately 
sealed or intrinsically safe.

• In case of leakage/spillage happened, 

immediately ventilate area and stay upwind 
and away from spill/release.

• In case of leakage/spillage happened, do 

notify persons down wind of the leaking/spill, 
isolate immediate hazard area and keep 
unauthorized personnel out.

ACXF55-1918̲OL.ai   6   6/1/2018   1:12:43 PM

ACXF55-1918̲OL.ai   6   6/1/2018   1:12:43 PM

Summary of Contents for CS-LU12UKYRN Series

















Reviews: