background image

4

Safety precautions

To prevent personal injury, injury to others or property 
damage, please comply with the following: 
Incorrect operation due to failure to follow instructions 
below may cause harm or damage, the seriousness of 
which is classified as below:

This appliance is filled with R32 (mild 
flammable refrigerant). If the refrigerant is 
leaked and exposed to an external ignition 
source, there is a risk of fire.

WARNING

This sign warns of death 
or serious injury.

CAUTION

This sign warns of injury 
or damage to property.

The instructions to be followed are classified by the 
following symbols:

This symbol denotes an action that 
is PROHIBITED.

These symbols denote actions 

COMPULSORY.

WARNING

Indoor unit and outdoor unit

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, or lack 
of experience and knowledge, unless they have 
been given supervision or instruction concerning 
use of the appliance by a person responsible for 
their safety. Children should be supervised to 
ensure that they do not play with the appliance.
The appliance shall be installed, and/or operated 
in a room with floor area larger than A

min

(m²) and 

keep away from ignition sources, such as heat/
sparks/open flame or hazardous areas such as 
gas appliances, gas cooking, reticulated gas 
supply systems or electric cooking appliances, etc.
(Refer to Table A of Installation instructions table 
for A

min

(m²))

Be aware that refrigerant may not contain an 
odour, highly recommended to ensure suitable 
flammable refrigerant gas detectors are present, 
operating and able to warn of a leak.
Please consult authorised dealer or specialist to 
clean the internal parts, repair, install, remove 
and reinstall the unit. Improper installation and 
handing will cause leakage, electric shock or fire.
Confirm with authorised dealer or specialist on 
usage of any specified refrigerant type. 
Using refrigerant type other than the specified 
may cause product damage, burst and injury etc.
Do not use means to accelerate the defrosting 
process or to clean, other than those 
recommended by manufacturer. Any unfit 
method or using incompatible material may 
cause product damage, burst and serious injury.
Do not pierce or burn as the appliance is 
pressurized. Do not expose the appliance to 
heat, flame, sparks, or other sources of ignition. 
Else it may explode and cause injury or death.
Do not install the unit in a potentially explosive 
or flammable atmosphere. Failure to do so could 
result in fire.
Do not insert your fingers or other objects 
into the air conditioner indoor or outdoor 
unit, rotating parts may cause injury.
Do not touch the outdoor unit during lightning, it 
may cause electric shock.
Do not expose yourself directly to cold air for a 
long period to avoid excess cooling.
Do not sit or step on the unit, you may 
fall down accidentally.

ACXF55-2751̲OL.ai   4   3/3/2020   9:50:35 AM

ACXF55-2751̲OL.ai   4   3/3/2020   9:50:35 AM

Summary of Contents for CS-KU12WKY Series

















Reviews: