9
INDOOR UNIT
CAUTION
•
Switch off the power supply and unplug before cleaning.
•
Do not touch the aluminium
fi
n, sharp parts may cause injury.
CLEANING INSTRUCTIONS
CLEANING INSTRUCTIONS
HINT
HINT
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may see error
code “H99”. Please consult authorized dealer.
CLEANING INSTRUCTIONS
CLEANING INSTRUCTIONS
HINT
HINT
• Do not use benzene, thinner or scouring powder.
• Use only soap ( pH7) or neutral household detergent.
• Do not use water hotter than 40°C.
• To ensure optimal performance of the unit, cleaning
maintenance has to be carried out at regular intervals.
Dirty unit may cause malfunction and you may see error
code “H99”. Please consult authorized dealer.
POWER
TIMER
AUTO C
OMFORT
NANOE-G
POWERFUL
QUIET
2
8
1
4
9
5
6
7
3
5
HUMAN ACTIVITY SENSOR
• Do not hit or violently press the sensor or
poke it with a sharp object. This can lead to
damage and malfunction.
• Do not place large objects near the sensor
and keep away heating units or humidi
fi
ers
from the sensor’s detection area. This may
lead to sensor malfunction.
10
nanoe-G GENERATOR
• Do not touch during operation.
1
INDOOR UNIT
• Wipe the unit gently with a soft, dry cloth.
2
FRONT PANEL
Remove Front Panel
• Raise and pull to remove the front panel.
• Wash gently and dry.
Close Front Panel
2
1
1
1 Press down both ends of the front panel to close it.
2 Press at center of the front panel to close it securely.
(CS-E18NKR, CS-E21NKR, CS-E24NKR, CS-E28NKR)
3
SUNLIGHT SENSOR AND REMOTE CONTROL
RECEIVER
4
ALUMINIUM FIN
5
HUMAN ACTIVITY SENSOR
6
HORIZONTAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
7
VERTICAL AIRFLOW DIRECTION LOUVER
• Do not adjust by hand.
8
AUTO OFF/ON BUTTON
• Use when remote control is misplaced or a malfunction
occurs.
Action
Mode
Press once.
Auto
Press and hold until 1 beep is heard,
then release.
Cooling
Press and hold until 1 beep is heard,
then release.
Press again until 2 beeps, then release.
Heating
Press the button to turn off.
9
AIR FILTERS
• Air
fi
lter cleaning is required every two weeks.
• Wash/rinse the
fi
lters gently with water to avoid damage
to the
fi
lter surface.
• Dry the
fi
lters thoroughly under shade, away from
fi
re or
direct sunlight.
• Replace any damaged
fi
lters.
10
nanoe-G GENERATOR
Clean with dry cotton bud.
•
nanoe-G generator cleaning is
recommended every 6 months.
