background image

5

• 

 and 

 can be activated in 

all modes and can be cancelled by pressing the 

respective button again.

• 

 and 

 can not be selected at the same 

time.

• 

 and 

 can be activated even when the unit 

is turned off. In this condition, fan speed and air swing 

can not be adjusted.

ENGLISH

  TO SET THE TIMER

  TO SET THE TIMER

•  To turn ON or OFF the unit at a preset time.

4)-%2

Select ON or 

OFF timer.

Set the time.

Con

fi

 rm.

•  To cancel ON or OFF timer, press 

 or 

 then 

press 

.

•  When ON Timer is set, the unit may start earlier (up 

to 15 minutes) before the actual set time in order to 
achieve the desired temperature on time.

•  Timer operation is based on the clock set in the remote 

control and repeats daily once set. For clock setting,  
please refer to Remote Control Preparation at back 
cover.

•  If timer is cancelled manually or due to power failure, 

you can restore the previous setting (once power is 
resumed) by pressing 

.

  OPTIONAL SETTINGS

 OPTIONAL 

SETTINGS

Patrol starts automatically with the unit 

switched on with 

.

Press and hold for 5 seconds, then release 
to disable or restore this setting.

Press and hold for 5 seconds to dim or 
restore the unit’s indicator brightness.

Press and hold for approximately 10 
seconds to show temperature setting in 
°C or °F.

Press and hold for approximately 5 seconds 
to show 12-hour (am/pm) or 24-hour time 
indication.

 

Press to restore the remote control’s default 

setting.

  

Not used in normal operations.

Set the temperature 1°C higher in cool mode than the 
desired temperature to achieve a 10% power saving.

Use curtains to screen off sunlight and outdoor heat to 
reduce power consumption during cool mode.

TO SELECT FAN SPEED

(3 OPTIONS) 

•  For AUTO, the indoor fan speed is automatically 

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW 

DIRECTION (5 OPTIONS)

•  Keeps the room ventilated.

•  If AUTO is set, the louvers swing up/down 

automatically.

TO ENJOY CLEAN & FRESH 

AIR

•  Generates negative ions to produce fresh air effect 

and attract dust which will then be captured at the 

positively charged e-ion 

fi

 lters.

TO MONITOR AIR 

QUALITY

Indicator Air Quality

Blue

Clean

Orange

Moderate

Red

Dirty

•  Patrol sensor detects air quality.

•  When air quality is at dirty 

level, e-ion operation will start 

automatically.

POWERFUL

NORMAL

QUITE

TO ENJOY QUIET ENVIRONMENT

•  This operation reduces air

fl

 ow noise.

TO ACHIEVE TEMPERATURE QUICKLY

•  This operation will stop automatically after 

15 minutes.

Summary of Contents for CS-C12HKD









Reviews: