background image

4

   PRODUCT OVERVIEW & OPERATIONS

Front panel

Receiver

Auto OFF/ON button

•  Used when remote control is misplaced 

or malfunction.

Action

Mode

Press once.

Auto

Press and hold until 1 beep 

is heard, then release.

Cooling

Press the button to turn off.

INDICATOR

Maximum distances:  8m

Horizontal air

fl

 ow 

direction louver

• Manually 

adjustable.

Vertical air

fl

 ow 

direction louver

•  Do not adjust 

by hand.

Remote control 

display

TO TURN ON OR OFF THE UNIT

•  Please be aware of the OFF indication on the remote control 

display to prevent the unit from starting/stopping improperly.

TO SET TEMPERATURE

•  For cool and dry modes, the range of temperature for selection is 

16°C ~ 30°C.

•  Operating the unit within the recommended temperature could 

induce energy saving.

COOL mode : 26

˚

C ~ 28

˚

C.

DRY mode : 1

˚

C ~ 2

˚

C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

•  Unit selects the operation mode according to the room 

temperature.

•  Once auto mode is selected, the unit will operate at the standard 

setting temperature.

•  To change the standard setting temperature, press 

 for “HI” or 

 for “LO”.

Room 

temperature

Operation 

mode

Standard setting 

temperature

HI 

(+2°C)

LO 

(-2°C)

23°C & above

Cool

25°C

27°C

23°C

Below 23°C

Dry

22°C

24°C

20°C

COOL mode - To enjoy cool air
DRY mode - To dehumidify the environment

•  Unit operates at low fan speed to give a gentle cooling operation.

e-ion AIR PURIFYING SYSTEM

 

Do not touch during operation

e-ion 

fi

 lters

Active e-ion Power 

Module

Active e-ion Generator

  PRODUCT OVERVIEW & OPERATIONS

 (Green) (Orange) 

(Orange) 

(Orange) (Blue)

Summary of Contents for CS-C12HKD









Reviews: