background image

27

!

   Warning

1) If the supply cord  is damaged or need to be replaced, it must  be replaced by the manufacturer or its service agent

or a similarly qualified person in order to avoid a hazard.

2) Remove power plug or disconnect from the mains before servicing this appliance.

3) Do not repair by yourself.

In case of malfunction of this appliance, do not repair by yourself.
Contact to the sales dealer or service dealer for a repair.

4) The appliance is not intended for use by young children or infirm persons without supervision.

5) Young children should be supervised to ensure that they do not play with the appliance.

6) Turn off the power (Isolation from main power supply).

Pull off the power plug from the receptacle, or switch off the breaker, or switch off the power  disconnecting mean
to isolate the equipment from the main power supply in case of an emergency.

!

   Caution

DISCONNECT THE MAINS PLUG FROM THE SUPPLY SOCKET WHEN NOT IN USE, WHERE SUPPLY
CONNECTION IS VIA MAINS PLUG.

IMPORTANT

1. WHEN THE POWER CORD IS CONNECTED TO THE MAINS THROUGH A MULTI POLAR SWITCH

    THERE MUST BE A MULTI POLAR SWITCH (DISCONNECTING MEANS) WITH A MINIMUM 3 mm

    CONTACT GAP IN THE FIXED INSTALLATION CIRCUIT.

2. WHEN THE POWER PLUG IS CONNECTED TO THE RECEPTACLE

Replacement or installation of power plugs shall be performed only by authorised/qualified personnels.

The wires in this main lead are coloured in accordance with the following code :
                       Green-and-yellow  :  Earth
                       Blue                       :  Neutral
                       Brown                    :  Live

If the colours of the wires in the main lead of this appliance do not correspond with the coloured markings
indentifying the terminals in your plug, proceed as follows :
The green-and-yellow wire must be connected to the terminal in the plug which is marked with letter E or by
the earth symbol 

!

 or coloured green or green-and-yellow.

The blue wire must be connected to the terminal which is marked with the letter N or coloured black.
The brown wire must be connected to the terminal which is marked with the letter L or coloured red.

Summary of Contents for CS-C125KR































Reviews: