background image

4

ENGLISH

Do not remove the power
plug by pulling the cord.

Hold the plug when disconnect-
ing the plug from the wall outlet.

Do not use for other pur-
poses.

Do not use for preservation pur-
poses. It will affect food quality,
animals or plants.

Do not wash the unit with
water.

It could cause an electric shock.

Caution

When cleaning the unit, re-
move the plug.

This is to prevent injury due to the
rotating fan in the unit.

Ventilate the room regularly.

Since windows are kept closed, it
does good to open them periodi-
cally to ventilate the room.

Do not sit or place anything
on the outdoor unit.

You might fall off or the unit might
collapse.

Switch off the power supply if
the unit is not going to be
used for a long period of time.

If dust accumulates on the plug, it
will generate heat and this could
cause a fire.

Do not place combustor in the
path of the airflow from the
unit.

Incomplete combustion could
cause toxic gas (CO) poisoning.

Inspect the unit for any
damage.

Ensure that the necessary repairs
are carried out.

OFF

Switch off
the breaker.

Disconnect
the power
plug.

!

OFF

Summary of Contents for CS-A182KR

























Reviews: