Panasonic CS-20PM1HPK, Installation Manual

Page: 15 / 16

English 14
(3) How to select FORCED OFF and ON/OFF
• Turn the power on and then use the remote
controller to select operation.
• Set the remote controller to the field set mode.
For details, refer to the “HOW TO SET IN THE
FIELD”, in the remote controller manual.
• When in the field set mode, select mode
No. 12, then set the first code (switch) No. to
“1”. Then set second code (position) No. to
“01” for FORCED OFF and “02” for ON / OFF
OPERATION. (FORCED OFF at factory set)
9-5 CENTRALIZED CONTROL
• For centralized control, it is necessary to designate the group No. For details, refer to the manual of each
optional controllers for centralized control.
10. TEST OPERATION
Refer to the installation manual of the outdoor unit.
• The operation lamp of the remote controller will flash when an error occurs. Check the error code on the liq-
uid crystal display to identify the point of trouble. An explanation of error codes and the corresponding trou-
ble is provided in “CAUTION FOR SERVICING” of the indoor unit.
SETTING
Mode No.
SECOND
CORD NO.
FIRST
CORD NO.
FIELD SET MODE