10
CQ-C9800/9700U
E
N
G
L
I
S
H
CQ-C9800/9700U
11
E
N
G
L
I
S
H
Preparation
1
2
3
Battery Installation
1
Remove the battery holder.
Pull the holder out at position B while pushing
position A as indicated.
2
Install the battery on the battery holder.
3
Insert the battery holder back into its original
position.
Battery Notes
≥
Battery type: Panasonic lithium battery (CR2025)
(included)
≥
Battery life: Approximately 6 months under
normal use (at room temperature)
≥
Remove and dispose of an old battery
immediately.
≥
Do not disassemble or short the battery. Do not
throw a battery into a fi re.
≥
Keep the battery away from children to avoid the
risk of accidents.
≥
Follow local regulations when disposing of the
battery.
Back side
Lithium battery
(included)
Battery holder
Position A
Position B
Remote Control Unit
Caution:
≥
Improper use of the battery may cause
overheating, an explosion or ignition, resulting
in injury or a fi re.
Subwoofer
Preparation:
≥
Connect the subwoofer and the amplifi er (option)
(page 74).
Subwoofer level setting:
≥
You can change the subwoofer level (page 44).
Subwoofer low pass fi lter setting:
≥
You can select the upper limit frequency of the
sound from subwoofer (page 44).
The 12-hour system is used for the clock.
≥
Turn your car’s ignition key to the ACC or ON
position.
≥
Press [SOURCE] (PWR).
≥
When the power is switched on for the fi rst
time, a demonstration appears on the display.
Press [DISP] (display) to change to regular
mode (page 22).
1
Press
[MENU]
.
Press and hold
[MENU]
for more than
2 seconds.
2
Press
[
$
]
to select
“DISPLAY”
.
3
Press
[
#
]
to select
“CLOCK ADJ”
.
4
Press
[SET]
.
5
Setting.
Hours:
1
Press
[
%
]
.
The hour display hilights.
2
Press
[
"
]:
Put forward
3
Press
[
#
]:
Put back
Minutes:
1
Press
[
$
]
.
The Minutes display hilights.
2
Press
[
"
]:
Put forward
3
Press
[
#
]:
Put back
6
Complete.
Press
[SET]
.
Note:
≥
Press and hold
[
"
]
or
[
#
]
to change numbers
rapidly.
Clock Setting
