26
27
CQ-VW100N
English
Press
[TA]
to switch TA mode as follows.
(Only for the button
[TA]
on the player)
The following functions are available when the TA mode
is active.
¡
A TP (Traffic programme) station is automatically
searched for and received at the instant of toggling the
TA mode on if you are receiving a non-TP station.
¡
When executing station search or APM, only TP sta-
tions are selected.
¡
Setting to TA on with the unit in another mode, it will
automatically switch to radio mode and output the
traffic announcement when the traffic announcement
begins. The traffic announcement having finished, the
unit will return to the previous mode (TA Standby
Mode (Except in the case of the menu screen)).
For listening to only traffic information, activate TA and
set the volume to 0 in FM mode.
Once traffic information starts, the volume changes to
the TA volume. (
a
page 29)
Note
:
¡
Traffic information is available in monaural.
Traffic Information Only (TA Mute)
The following functions are available when the AF mode
is active.
¡
When receiving conditions become bad, a station with
better receiving conditions is automatically tuned in to.
¡
When executing APM, only RDS stations are selected.
¡
When calling up a preset station, a best receiving sta-
tion is selected automatically. (
BSR
Best Stations
Research)
If reception becomes poor when tuning in a preset sta-
tion, touch the same preset number button. The same
station with better reception will be searched for.
Press the same preset number button again to cancel.
Note
:
¡
For PI Seek, cancel the TA mode first, then execute PI
Seek.
PI Seek
(Programme Identification Seek)
Touch
to switch AF mode as follows.
TA on/off
AF on/off
❏
Traffic Announcement (TA)
❏
AF (Alternative Frequency)
: Receive traffic programmes automati-
cally.
: TA is not active.
TA OFF
TA ON
: Switching immediately after the receiv-
ing sensitivity becomes low (for a sub-
urban area with a fine view)
: No switching even after the receiving
sensitivity temporarily becomes low
(for an area with a obstructed view)
: When the AF network of an RDS station
is not required.
*The displayed contents on the touch panel vary with cir-
cumstances.
Note
:
¡
The setup is the same way as the one from the Setup.
(
a
page 29)
Off
2
1
AF setting*
MUTE
VOL
SRC
/
PWR
DIMMER
TA
TUNE/TRC K
TILT
CQ-VW100N
TA
TA/TP indicator
[TA]
