Panasonic CQ-VD6503W, Instruction Manual

Page: 10 / 145

Pin
No.
Port Description I/O Vol
(V)
1 AVREF0 Reference voltage for A/
D converter - 3.2
2 AVSS Ground for A/D converter - 0
3 ANT CNT Antenna control O 3.2
4 RCA SW Voice change of DVD-CH
and HUB. H: HUB L:VTR2 O 0
5 AVREF1 Reference voltage for A/
D converter - 3.2
6 Touch
RESET
Touch Panel reset O 3.2
7 HUB CNT HUB control. L: HUB CPU
Communication O 3.2
8 IC/FLMD0 Flash memory update
control - 0
9 VDD +3V power supply - 3.2
10 REGC Bypass capacitor
terminal for voltage reg. - 2.5
11 VSS Ground - 0
12 X1 Crystal osillator terminal I 1.1
13 X2 Crystal osillator terminal - 1.2
14 /RESET System reset I 3.2
15 XT1 (Connecting to ground) - 0
16 XT2 No Connection - -
17 EVENT EVENT input (for HUB) I 0
18 CH STB/
XM DET2
Changer data strobe I 5.0
19 RDS DATA RDS data I 3.3
20 RDS CLK RDS clock I 0
21 MAIN CNT Main_Control (for HUB) O 5.0
22 OSD CS OSD chip select O 1.0
23 OSD DO OSD control data O 0.6
24 OSD CLK OSD data shift clock O 2.2
25 XM TX(MO) XM data O 5.0
26 CH DATA/
XM RX
Changer data I 0
27 CH CLK/
XM DET1
Changer clock / XM
detection signal I 3.1
28 REMO
DATA
Ext. remote control signal I 5.0
29 CHC REM
OUT
Changer remote control
code O 5.1
30 I2C CLK I2C bus clock O 5.1
31 I2C DATA I2C bus data O 5.1
32 OSD
RESET
OSD reset O 3.2
10