21
CQ-RD153/RD143/RD133N
18
E
N
G
L
I
S
H
20
CQ-RD153/RD143/RD133N
17
E
N
G
L
I
S
H
ACC
BATTERY 15A
A
B
Electrical Connections
Cautions:
¡Check the connectors provided on your
car (see precaution below) before con-
necting the system.
¡This unit is designed for use in a car
having a 12-volt negative ground bat-
tery system.
¡To prevent damage to the unit, be sure
to follow the connection diagram.
¡Strip about 5 mm of the lead ends for
connection (only non-ISO connector
cords).
¡Do not insert the power connector into
the unit until the wiring is complet-
ed.
If the fuse (rear panel) blows frequently,
they may be something wrong with the
unit. Consult your nearest Panasonic
¡This unit can be connected to an optional CD
changer (CX-DP880N,CX-DP9061/DP9060EN, CX-
DP88N, CX-DP801/DP803EN or CX-DP601EN) and
optional extension cord.
¡For details consult your nearest authorized
Panasonic Dealer.
¡For connection to a CD changer, refer to the oper-
Fuse (15 A)
To remove the Fuse
Precautions (ISO
Connector)
¡The pin arrangement of the power
connector conforms to ISO standard.
¡The pin arrangement of ISO connec-
tors in some cars may differ from
the ISO standard.
¡Please check that the pin arrangement
of the connector in your car con-
forms to ISO standard.
¡For car types A and B, change the
wiring of the red and yellow leads as
shown at below.
¡After connection, insulate the por-
C
C
BATTERY 15A
ACC
C
C
BATTERY 15A
ACC
ACC
C
C
ISO
A
B
Standard ISO
Car Type A
Car Type B
BATTERY 15A
A7: IGN or ACC switched 12 V sup-
(Red)
(Yellow
(Yellow
(Red
(Red
(Yello
(Yellow
(Red
(Red
(Yellow
(Red)
(Yello
A4: +12 V Battery (Permanent sup-
A7: +12 V Battery (Permanent sup-
A4: No connection
A
A
1
Fuse
e
Power and
Speaker
Connector
3
2
A5*:
This lead can be used as either Amp.Relay Control Power Lead or Motor Antenna Relay
Control Lead, or both at the same time. However, the current capacity of this lead is 500
A 8 (Black)
A 7 (Red)
A 4 (Yellow)
A 5 (Blue w/white
B 8 (Green w/black
B 7 (Green)
B 6 (White w/black
B 4 (Gray w/black
B 2 (Violet w/black
B 1 (Violet )
A5* (Blue w/white
A5*
:Motor Antenna Relay Control
Lead (Blue w/white stripe)
To Motor Antenna (Max. 500
m A )
*
. This lead is not intended
for use with a switch actuated
power antenna.
Note:
The power antenna extends
A7
: Power Lead (ACC or IGN)
(Red)
A8
: Ground Lead (Black)
To a clean, bare metallic part of the
A4
: Battery Lead (Yellow)
To the car battery, continuous
B8
: Rear Left –
B7
: Rear Left +
B6
: Front Left
–
B5
: Front Left
+
B4
: Front
Right –
Speaker
C1 :
External Mute Lead (Orange)(not used)
Battery Lead (Yellow)
To the car battery, continu-
Ground Lead (Black)
To a clean, bare
metallic part of the
C3
: External Remote Control Lead (Brown
W/black stripe)(not used)
Wiring Diagram
Example:
Connection with CD changer CX-
CQ-RD153
/RD143/RD133N
Antenna
CD Changer
Control
(L)
(R)
R C A
CD Changer
CX-DP880N
Extension Cord
(DIN/BATT/RCA/GND)
(supplied for an optional CD
D I N
CD Changer
Input
(L)
(R)
