≥
Condensation has formed in the unit. Wait 1 or 2 hours for the
unit to dry, and then try again.
≥
The unit can only play the following types of discs: DVD video,
Video CD, and music CD.
≥
Refer to the section “Notes on Disc” and clean the disc.
≥
Insert the disc with the label facing up.
E
N
G
L
I
S
H
57
CQ-DVR7000U
CQ-DVR7000U
76
77
Troubleshooting (continued)
❐
Sound Settings
❐
Radio
❐
DVD/Video CD/CD
❐
DVD/Video CD/CD (Continued)
If the Unit does not Operate Properly
<
Reset Switch
Reset Switch
Push a thin, unbreakable object into this hole to press the
reset switch.
≥
After a reset, the unit reverts to its initial state.
Note that any information or settings stored in the unit’s
memory will be lost.
Station presets were
cancelled.
The sound skips.
The sound quality is
poor.
The disc will not eject.
Symptom
Remedy
Page
Symptom
Remedy
Page
Symptom
Remedy
Page
Symptom
Remedy
Page
There is a lot of noise
in FM stereo and
monaural broadcasts.
Vibrations cause
skips.
Select another station with a stronger signal.
34
The audio/subtitle
language selected in
the initial settings is
not used.
If audio or subtitles in that language are not recorded on the disc,
the audio or subtitles do not switch to that language. (Some
discs permit switching through a menu screen. Refer to the guide
provided with your disc.)
42
≥
Install the unit at an angle less than 30 degrees.
≥
Refer to the section on installation and make sure that the unit
is securely attached to the mounting bracket, etc.
The disc will not play,
or else it stops very
quickly.
≥
Press the reset switch if pressing any of the other
buttons has no effect.
Caution
Connect the battery power cord to a terminal that is always
supplied with power.
Refer to the section “Notes on Disc” and clean the disc.
Open the panel and press [
<
]. If the disc still does not eject,
press the reset switch.
E
N
G
L
I
S
H
58
49
It is difficult to hear
quiet sounds.
Set the DR COMP setting to “Minimum”.
71
78
66
67
36, 77
=
7
78
36
Cannot switch the
audio language/
subtitle language/
angle.
≥
It is not possible to switch if the disc does not have multiple
audio languages/subtitle languages/angles recorded on it.
(Refer to the guide provided with your disc.)
≥
Some discs permit switching through a menu screen.
≥
Sometimes, switching angles is possible only with certain
scenes.
=
43
=
Messages in the menu
screen are not in the
desired language.
Check the setting for “Menu Language” in the initial settings.
47
No sound is output
from a speaker.
≥
Adjust “BAL//FAD” to a suitable position.
≥
Connect the cords correctly.
≥
Correct the speaker settings.
≥
The sound is recorded only for the center speaker parts on the
disc, and SOUND or PROLOGIC has been set.
➡
Select OFF as the sound mode setting.
53
70
27
50
No sound is output
from the center
speaker.
≥
Raise the output level/volume.
≥
Select any surround sound setting except OFF.
≥
Set the speaker output setting to “OFF”.
≥
Set the Private Mode to OFF.
30, 55
51
31
60
DR COMP does not
work. (“DR COMP”
does not light .)
This function only works with Dolby Digital encoded material.
49
=
=
The picture becomes
distorted while fast
forwarding or
reversing.
The picture does not
appear on the TV.
A certain amount of distortion is normal.
≥
Check the connections.
≥
Check the settings for the TV itself.
≥
Stop the car and apply the parking brake.
The buttons do not
work.
Some operations are not permitted with certain discs.
=
Video CD menu
playback does not
work.
Menu playback is only possible when playing a video CD that has
the playback control feature.
No subtitles appear.
=
Subtitles must be recorded on the disc, or they will not appear.
(Refer to the guide provided with your disc.)
70
=
=
The size on the
connected TV is not
4:3 (16:9).
48
Set “TV Aspect” correctly in accordance with the TV that you are
using.
When playing in
stereo, left and right
channels are reversed.
Connect the speaker cords correctly.
70-72
