27
CQ-DFX983/903N
English
26
CQ-DFX983/903N
Anti-Theft System
This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable. The security indicator
will blink.
Remove the removable face plate
q
Switch off the power of the unit.
w
Press
(OPEN)
. The removable face plate will be
opened.
e
Push the face plate to either the right or left.
r
Pull it out toward you.
t
Gently press the bottom of the case and open the cover.
Place the face plate into the case and take it with you when
you leave the car.
Install Removable Face Plate
q
Fit the face plate with its right or left hole on one of the
pins provided on the main unit.
w
Fit the other hold on the other pin applying slight pressure.
e
Move the face plate up and down a few times to make sure
it is secure. Then close the front panel and press down the
right side of the face plate until it clicks into plate.
Security Functions
Following functions are activated when the Security Function
is ON. (
a
Page 25)
■
Security indicator
It blinks when the removable face plate is removed from
the unit.
■
Panel Removal Alarm
It sounds to warn you not to forget to remove the panel
before leaving your car.
■
Security message
Also message is displayed.
OPEN
2
1
3
1
3
2
Removable Face Plate Case
Contact
Security Indicator
Cautions:
¡
This face plate is not waterproof. Do not expose it to water or excessive moisture.
¡
Do not remove the face plate while driving your car.
¡
Do not place the face plate on the dashboard or nearby areas where the temperature rises to high levels.
¡
Do not touch the contacts on the face plate or on the main unit, since this may result in poor electrical contacts.
¡
If dirt or other foreign substances get on the contacts, wipe them off with clean and dry cloth.
¡
To avoid damaging the front panel, do not push it down or place objects on it while it is open.
Contact
Pull out
Push
Open
TA
PW
R
CQ-DFX983N
MU
TE
SO
UR
CE
TU
N
E
/T
RA
CK
OPEN
1
Press
(MENU) to display the menu dis-
play.
For using the remote control, hold down
(
MENU
) for
2 sec. or more.
2
Press
(
]
)
or
(
[
) to display the PIC-
TURE menu.
3
Press
(
}
) or
(
{
) to select a
function to be adjusted.
4
Press
(SET) to confirm the picture.
5
Adjust the setting value.
6
Press
(SET).
7
Press
(MENU) to confirm the adjust-
ment.
For using the remote control, hold down
(
MENU
) for
2 sec. or more.
MENU
SEL
MENU
SEL
Display Setting
(PICTURE menu)
Adjustment to display on the picture menu
Contrast adjustment
(Setting range : 1 to 5, Default:Contrast 3)
(
[
) :
Tilting up view angle
(
]
):
Tilting down view angle
Clock adjustment
(
[
): Adjusting minutes
(
}
) : Forward
(
]
): Adjusting hours
(
{
) : Backward
Spectrum analyzer setting
(Setting range : 7types, Default:All)
Switching by
(
]
)
or
(
[
)
All
:
Random display from among patterns A – E
Pattern A
:
F1
Pattern B
:
Soccer
Pattern C
:
Space Scene
Pattern D
:
Snow Board
Pattern E
:
MTB
STD
Standard: 25-band display (Spectrum analyzer)
Note:
Adjust the clock when “NO CT” appears
on the display.
(Security message display)
