background image

E
N

G

L

I

S
H

17

E
N

G

L

I

S
H

18

CQ-DF202W

CQ-DF202W

26

27

Installation Guide

(Continued)

Remove the removable face plate.

1

Press [OPEN]. The removable face plate will
be opened.

2

Push the face plate to the left.

3

Pull it out toward you.

1

2

Remove the Unit

Lock lever

8

Trim plate

SOURCE

REP

45W

X

4

RANDOM

OPEN

[OPEN]

PWR

Remove the trim plate 

8

with a screwdriver.

Pull out the unit while pushing down the lock
lever with a screwdriver.

Remove the unit pulling with both hands.

1

1

Open

2

Push

3

Pull out

Contact

Main unit

Lock lever

Screwdriver

2

3

4

Switch off the power of the unit.

Anti-Theft System

Panel Removal Alarm

This alarm sounds to warn you not to forget to re-
move the panel before leaving your car.

Press and hold [SEL] to turn the panel removal
alarm on or off. (“ALRM On” or “ALRM OFF”)

Install Removable Face Plate

1

Fit the face plate with its left hole on one of the
pins provided on the main unit.

2

Fit the other hold on the other pin applying
slight pressure.

3

Move the face plate up and down a few times to
make sure it is secure. Then close the front
panel and press down the right side of the face
plate until it clicks into plate.

Caution:

This face plate is not waterproof. Do not expose it to water or excessive moisture.

Do not remove the face plate while driving your car.

Do not place the face plate on the dashboard or nearby areas where the temperature rises to high level.

Do not touch the contacts on the face plate or the main unit, since this may result in poor electrical con-
tacts.

If dirt or other foreign substances get on the contacts, wipe them off with a clean and dry cloth.

Do not apply a strong downward force onto the face plate and do not put anything on it while it is open, or
it might be damaged.

This unit is equipped with a removable face plate. Removing this face plate makes the radio totally inoperable.

Place the Removable Face
Plate into Case

1

Switch off the power of the unit.

2

Remove the removable face plate. (

page 26)

3

Gently press the bottom of the case and open
the cover. Place the face plate into the case and
take it with you when you leave the car.

2

1

3

7

Removable face plate case

Contact

Default

Summary of Contents for CQ-DF202W











Reviews: