background image

E
N

G

L

I

S
H

12

CQ-DF202W

21

Maintenance

E
N

G

L

I

S
H

11

CQ-DF202W

20

Troubleshooting

(Continued)

Maintenance

Your product is designed and manufactured to ensure a minimum of maintenance. Use a dry, a soft cloth for
routine exterior cleaning. Never use benzine, thinner or other solvents.

Product Servicing

If the suggestions in the charts do not solve the problem, we recommend that you take it to your nearest au-
thorized Panasonic service station. The product should be serviced only by a qualified technician.

Replace the Fuse

Use fuses of the same specified rating (15 A). Using different substitutes or fuses with higher ratings, or con-
necting the product directly without a fuse, could cause fire or damage to the stereo unit. 
If the replacement fuse fails, contact your nearest Panasonic service station for service.

Error Display Messages

CD Player/CD Changer Control

Disc has scratches.

The disc will be ejected automatically. Check disc. 

Disc is dirty, or is upside down.

A disc that has data other than CD-DA type is loaded.

The disc will be ejected automatically. Check disc. 

No operation by some cause.

If normal operation is not restored, call the store where you pur-
chased the unit or the nearest service station to ask for repairs.

No disc in the changer (magazine).

Insert discs into the changer (magazine).

Display

Cause/Step

Cleaning this Unit

Use a dry, soft cloth to wipe.

Caution on Cleaning

Never use solvents such as benzine, thinner as they
may mar the surface of the unit.

Label side

<Right>

<Wrong>

Rough edges

Do not use irregular shaped discs.

How to hold the disc

Do not touch the underside of the disc.

Do not scratch the discs.

Do not bend disc.

When not in use, keep the disc in the case.

Do not use irregular shaped discs.

Do not leave discs on the following places:

Direct sunlight

Near car heaters

Dirty, dusty and damp areas

Seats and dashboards

Disc cleaning
Use a dry, soft cloth to wipe from the center outward.

Caution on new discs
A new disc may have rough edges on its inner and outer
perimeter. These may cause malfunction.
Remove the rough edges using a pencil, etc.

Do not attach any seals or labels to your discs.

Do not write on the disc label in a heavy pen or ball-
point pen stroke.

Notes on CD/CD Media (CD-R, CD-RW)

Do not play any ordinary music CDs with labels
other than this one.

Notes on CD-Rs/RWs

You may have trouble playing back some CD-R/RW discs recorded on CD recorders (CD-R/RW drives), ei-
ther due to their recording characteristics or dirt, fingerprints, scratches, etc. on the disc surface.

CD-R/RW discs are less resistant to high temperatures and high humidity than ordinary music CDs. Leaving
them inside a car for extended periods may damage them and make playback impossible.

The unit may not successfully play back a CD-R/RW that was made by the combination of writing software, a
CD recorder (CD-R/RW drive) and a disc if they are incompatible one another.

This player cannot play the CD-R/RW discs if the session is not closed.

This player cannot play the CD-R/RW discs which contains other than CD-DA data.

Be sure to observe the instructions of CD-R/RW disc for handling it.

Care of the Unit

Note:

There may be cases where the disc numbers affected by an error are designed before “E1” or “E2”.

Displays and the steps to be taken for errors vary in part from changer to chager. For details, refer to the op-
erating instructions for the changer used.

Summary of Contents for CQ-DF202W











Reviews: