CQ-C9800N/C9700N
Radio
English
17
16
Radio
A radio DSP is integrated into this unit. The IF filter allows the radio to adjust the bandwidth automatically to maintain optimum
reception.
CQ-C9800N/C9700N
Up to 6 stations can be preset in AM (MW/LW), FM1,
FM2, and FM3 respectively.
Preset stations can be simply called up by pressing
[
}
]
(
P·SET
) or
[
{
]
(
P·SET
).
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
Auto Preset Memory (APM)
Six stations with the first highest to the 6th highest in
signal strength will be preset to each band.
1
Select a band.
2
Hold down
[BAND]
(
APM
) for 2 sec.
or more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press
[
}
]
or
[
{
]
.
Notes:
¡
New stations overwrite existing saved stations.
¡
Only RDS stations will be saved at default setting (AF ON).
To select non RDS stations too, set AF OFF.(
a
page 19)
Manual station preset
1
Tune in to a station.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
4
Preset the station by holding down
[
}
]
or
[
{
]
for 2 sec. or more.
Frequency/preset number blinks once.
Notes:
¡
New stations overwrite existing saved stations.
¡
In step 2, a station can be registered by holding down
the numeric button
[1]
~
[6]
for 2 sec. or more.
¡
To stop presetting stations, press
[DISP]
(Display)
.
1
Press
[SOURCE]
to select the radio
mode.
2
Press
[BAND]
to select a band.
Notes:
¡
For tuning in on only stations whose receiving
conditions are good in the station search, set
LOCAL to ON. (
a
page 17)
¡
For reducing noise when a receiving FM stereo
wave is weak, set FM MONO to ON. (
a
page 17)
3
Select a station.
Frequency adjustment
[
]
]
(
TUNE
):
Lower
[
[
]
(
TUNE
):
Higher
Note:
Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[
{
]
(
P·SET
: Preset):
Lower preset number
[
}
]
(
P·SET
: Preset):
Higher preset number
Note:
Direct selection can be executed with
[1]
to
[6]
buttons on remote control.
Band
Frequency
Lights when
LOCAL
is
activated.
(
a
page 17)
Preset Number
Station Preset
(APM: Auto Preset Memory, P·SET: Preset)
Radio mode display
Note:
In AM mode, only LOCAL can be selected.
1
Press
[MENU]
to display the menu dis-
play.
For using the remote
control, hold down
[MENU]
for 2 sec. or
more.
2
Press
[
}
]
or
[
{
]
to select a mode to be
adjusted.
3
Press
[BAND]
(
SET
) to adjust.
4
Press
[MENU]
to confirm the adjust-
ment.
For using the remote control, hold down
[MENU]
for 2 sec. or more.
MONO (Monaural)
Noise reduction when the signal strength decreases
LOCAL
Setting when searching for a station
Mono/Local Setting (Radio Menu Display)
(MONO/LOCAL)
Lights while receiving an
FM stereo signal.
Lights when
MONO
is
activated.
(
a
page 17)
Receiving in stereo
(Default)
Receiving in mono and
reducing the noise level
(
lights.)
Searching even for a
relatively low-intensity
radio wave station
(Default)
Searching only for a high-
intensity radio wave
station (
lights.)
Operation Flow
CQ-C9800N
BAND
BAND
CQ-C9800N
BAND
BAND
CQ-C9800N
BAND
CQ-C9800N
BAND
BAND
