Radio
English
CQ-C8351N/C8301N/C7301N
19
18
Radio
This chapter explains how to listen to the radio.
CQ-C8351N/C8301N/C7301N
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing
[
}
]
(
P·SET
) or
[
{
]
(
P·SET
).
Notes:
¡
Direct Access can be executed with
[1]
to
[6]
buttons
on remote control.
¡
You can switch between 6 and 18 for FM presetting
stations. (
a
page 19)
¡
Preset stations are changeable. (
a
page 19)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND]
(
APM
)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press
[
}
]
or
[
{
]
.
Note:
¡
New stations overwrite existing saved stations.
¡
Only RDS stations will be saved at default setting (AF ON).
To select non RDS stations too, set AF OFF. (
a
page 21)
Manual station preset
1
Tune in to a station.
2
Hold down
[
}
]
or
[
{
]
for 2 sec. or
more.
3
Select a preset number by pressing
[
}
]
or
[
{
]
.
4
Preset the station by holding down
[
}
]
or
[
{
]
for 2 sec. or more.
Frequency/preset number blinks once.
Notes:
¡
New stations overwrite existing saved stations.
¡
In step 2, a station can be registered by holding down
the numeric button
[1]
to
[6]
for 2 sec. or more.
¡
To stop presetting stations, press
[DISP]
.
1
Press
[SRC: SOURCE]
to select the
radio mode.
2
Press
[BAND]
to select a band.
Notes:
¡
For tuning in on only stations whose receiving condi-
tions are good in the station search, set LOCAL to ON.
(
a
page 19)
¡
For reducing noise when a receiving FM stereo wave
is weak, set MONO to ON. (
a
page 19)
3
Select a station.
Frequency adjustment
[
]
]
(
TUNE
): Lower
[
[
]
(
TUNE
): Higher
Note:
Hold down for 0.5 sec. or more and release
for station search.
Preset station selection
[
{
]
(
P·SET: PRESET
): Lower preset number
[
}
]
(
P·SET: PRESET
): Higher preset number
Notes:
¡
Direct Access can be executed with
[1]
to
[6]
but-
tons on remote control.
¡
Stations in FM 1-3 are sequentially selectable
without changing bands when “ALL BAND” is
selected in “AUTO PRESET”.
Band
Frequency
Preset Number
Station Preset
(APM: AUTO PRESET MEMORY, P·SET: PRESET)
AF
SRC
PTY
CQ-C8301N
SQ
TA
Radio Mode Display
PTY
CQ-C8301N
Operation Flow
Mono/Local Setting (Radio Menu Display)
(MONO/LOCAL)
1
Press
[MENU]
to display the menu dis-
play.
For using the remote
control, hold down
[SEL](MENU)
for 2
sec. or more.
2
Press
[
}
]
or
[
{
]
to select a mode to be
adjusted.
3
Press
[BAND]
(
SET
)
to adjust.
4
Press
[MENU]
to
confirm the adjustment.
For using the remote control, hold down
[SEL]
(MENU)
for 2 sec. or more.
MONO (Monaural)
Noise reduction when the signal strength decreases
: Receiving in stereo (default)
: Receiving in mono and reducing the noise level
LOCAL
Setting when searching for a station
: Searching even for a relatively low-intensity radio
wave station (default)
: Searching only for a high-intensity radio wave
station
AUTO PRESET
You can select 6 or 18 stations for FM presetting with the
use of APM.
:
Presets 6 stations to FM1 to FM3 respectively, that is, 18
stations in total at the same time. This function is useful
for presetting more than 6 stations. (default)
:
Presets 6 stations with good reception to the selected
band from FM1 to FM3. This function is useful for
presetting stations in different areas in different bands.
PRESET SWAP
You can arrange the order of the preset stations. Preset
stations can be reordered as you like after executing APM
or the like.
1
Press
[
}
]
or
[
{
]
to select one station
to be interchanged.
2
Press
[BAND]
to confirm your selection.
3
Press
[
}
]
or
[
{
]
to select the other
station to be interchanged.
4
Press
[BAND]
to confirm your selection.
PTY
CQ-C8301N
PTY
CQ-C8301N
Lights when
LOCAL
is
activated. (
a
page 19)
Lights while receiving an FM stereo signal.
Lights when
MONO
is activated.
(
a
page 19)
Indicates the intensity of
the radio wave.
SRC
