background image

26

CQ-C5400/5300/5100W

CQ-C5400/5300/5100W

27

(default)

General

 (continued)

Open the Front Panel

Press 

[

<

: eject] (OPEN)

.

Note:

 If nothing is changed for 20 seconds, the original 

panel position will be recovered.

Close the Front Panel

Press 

[

<

: eject] (OPEN)

 again.

[MENU] (DIM)

[

<

: eject] 

(OPEN/TILT) 

Panel Angle (Tilt)

Press and hold 

[

<

: eject] (TILT)

 until you hear a 

beep (about 1 second) from the speaker output, and 
“TILT” is displayed. And then release it.
Set it to the position at which it is easy to read what 
is on the display.
Each time the above operation is repeated, the panel 
angle changes in the sequence shown below.

TILT 1

TILT 2

TILT 3

Open

Dimmer

Press and hold 

[MENU] (DIM)

 for more than 

2 seconds to change dimmer level setting as 
follows.

Brighter (default)

Medium

Darker

SQ (Sound Quality)

SQ is a function that can call up various sound 
types at the touch of button in accordance with your 
listening music type.
At SQ7, SQ presets P2 to P6 can also be fi nely 
adjusted to suit the acoustic characteristics inside 
the car and the user’s preference (page 38).

Press 

[SQ] 

to select a sound types 

as follows.

         lights (except SQ-FLAT).

[SQ]

 (Sound Quality)

Note:

 The position which has been set using TILT will 

be retained even when the operations below are 
performed.

 • 

OPEN/CLOSE

  • Power on/off

Flat frequency response 
not emphasize. (default)

Prevention of excessive 
equalizing and capability 
to cover wide variety of 
music. Listener-friendly 
and crisp sound.

Sharp and dynamic 
sound. Powerful deep 
bass and turgescent 
treble.

Highlighted vocals 
that are apt to be 
overwhelmed by 
instrumental sound.

Sound with emphasis on 
sharpness of high-hat 
and echo of saxophone. 
Jazz-specifi c  deep 
sound.
Reproduction of realism 
being in a club.

Preset number

E
N

G

L

I

S
H

4

E
N

G

L

I

S
H

3

indicator

TILT OFF

Press 

[DISP]

 (display) to return to the regular 

mode.

Note:

 If no operation takes place for more than 

5 seconds, the display returns to the regular mode.

 After pressing 

[SQ]

 on the main unit, you can 

also select a sound type by pressing the preset 
buttons 

[1] 

to 

[6]

.

 Setting of SQ, bass/treble and volume are 

infl uenced one another. If the infl uence mentioned 
above causes distortion to the audio signal, 
readjust bass/treble or volume (page 38).

SQ preset buttons [1] 

to

 [6] 

 If 

[

<

: eject] (OPEN)

 is pressed when a disc is in 

the player, the front panel opens and the disc is 
ejected automatically. 

  If no operation takes place for 20 seconds, the 

disc is automatically retracted into the main unit.

[DISP] 

(Display)

 

Caution:

  Do not pinch your fi nger or hand in the front 

panel when the panel is in motion.

Summary of Contents for CQ-C5400



























Reviews: