7
E
Windows 98
1
Turn your computer on.
2
At start up, press
Ctrl
to display the startup menu.
3
Select [Command prompt only].
4
Input the following command.
FDISK
Enter
5
The message [Do you wish to enable large disk support (Y/N) ..... ?] will be dis-
played. Press
Y
and then press
Enter
.
6
When [FDISK Options] is displayed, enter 5 for [5. Change current fixed disk drive]
and then press
Enter
.
7
When [Change Current Fixed Disk Drive] is displayed, enter 2 for [Enter Fixed Disk
Drive Number (1-2)] and then press
Enter
.
8
When [FDISK Options] is displayed, enter 1 for [1. Create DOS partition or Logical
DOS Drive] and then press
Enter
.
9
When [Create DOS Partition or Logical DOS Drive] is displayed, enter 1 for [1.
Create Primary DOS Partition] and then press
Enter
.
10
When [Create Primary DOS Partition] is displayed, follow the on-screen instructions.
11
An indication to restart the computer will be displayed. Press
Ctrl
+
Alt
+
Delete
.
The computer will restart.
12
Select [My Computer].
13
Click [D:]
(or the drive letter of a newly created drive)
with the right button
and select [Format].
14
Select [Full] for [Format type] and then select [Start].
15
At the confirmation message, select [OK].
Follow the on-screen instructions.
16
When the operation completes, be sure to select [Start] - [Shut Down] and restart the
computer before using the second hard disk.
17
If necessary, run SCANDISK to check the hard disk.
Windows NT
1
Turn your computer on.
Be sure to log on with the authority of an administrator.
2
Select [Disk Administrator] in [Start] - [Programs] - [Administrative Tools (Common)]
If the message [Configuration information about the missing disk(s) will be
retained] is displayed, select [OK].
3
The message [System configuration will now be updated] will be displayed. Select [OK].
If [Confirm] is displayed, select [Yes].
4
When [Disk Administrator] is displayed, click [Disk 1] with the right button and then
select [Create].
5
Specify the partition size and then select [OK].
If [Confirm] is displayed, select [Yes].
6
Close the [Disk Administrator].
