13
Getting Started
Usef
ul Inform
ation
Troubleshooting
Appendix
First-time Operation
Preparation
A
Check and identify the supplied accessories.
If you do not find the described accessories, contact your technical support office.
B
Read the LIMITED USE LICENSE AGREEMENT before breaking the seal on the computer’s packaging
(
Î
page 27)
.
Slide the battery pack in parallel with the arrow direction and attach it so that the
left and right dents (A) on the new battery pack match the projections (B) of the
computer.
In case that the dents does not match the projections of the computer, detach the
battery pack once, then slide it while pushing it lightly to avoid floating.
z
To remove
Slide both the left and right latches
to the unlocked position, and push
out the battery pack in parallel with
the computer.
CAUTION
z
Make sure the battery latches are securely locked. Otherwise the battery pack
may fall when you carry the computer.
z
Do not touch the terminals of the battery pack and the computer. Doing so can
make the terminals dirty or damaged, and may cause malfunction of the battery
pack and the computer.
Hold the side of the computer with either of your hands and then hold and lift the
(A) part to open the display.
CAUTION
z
Do not open the display wider than necessary (140° or more), and do not apply
excessive pressure to the LCD. Do not open or close the computer holding the
edge of the LCD segment.
• AC Adaptor . . . . 1
Model No: CF-AA6503A
• AC Cord . . . . . . .1
• Battery Pack. . . 1
Model No: CF-VZSU61U
• OPERATING INSTRUCTIONS (This book) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1
Insert the battery pack.
1
A
A
B
2
Open the display.
2
A
DFQW5519ZA_S10mk2_OI_7_M.book 13 ページ ２０１１年７月８日 金曜日 午後１時４４分
