![background image](http://html.mh-extra.com/html/panasonic/cf-r1series/cf-r1series_operating-instructions-manual_270508015.webp)
15
OperationOperation
The power saving function is factory set, so if there is no input from a key, the touch pad
or an external mouse (when one is connected) for a certain interval of time, the power
to the LCD and hard disk may be turned off. The LCD will resume operation when the
touch pad or an external mouse (when one is connected) is used or a key is pressed.
The power to the LCD may be turned off even when an application software is being
installed. In this case, because it is conceivable that a selection dialog box will be
shown, do not press
Space
or
Enter
to attempt to resume from this condition
as doing so may trigger a selection, but instead, press a key unrelated to the direct
triggering of a selection, like
Ctrl
.
In addition, when the computer is left alone, it automatically enters the standby or
hibernation mode (
“Standby/Hibernation Functions”). The computer
will resume by sliding the power switch.
Windows XP
When you create the first new account, you can only select [Computer administrator].
Only the added user account will be displayed in the Welcome screen. The account for
the administrator created during Windows setup (when the computer is started up for
the first time) will not be displayed.
When switching to a different user with the Fast User Switching function, it may
not be possible to set the settings of the display. In this case, log on with the
administrator authority again, not using the Fast User Switching function, and
try the operation once more.
NOTE
4
Select your application
You are able to start working on your computer.