![background image](http://html.mh-extra.com/html/panasonic/cf-r1series/cf-r1series_operating-instructions-manual_270508013.webp)
13
Getting Started
For an overview of Recovery Console, refer to [Help and Support].
1
Select [start] - [Help and Support].
2
Enter “Recovery Console” under [Search], then select
.
NOTE
Information for Windows XP
You can select Classic view for the Control Panel or select the Classic Start menu.
You can also change the way a user logs on or off.
The procedure in this manual uses the method or view of the Windows XP default
setting (not Classic view or Classic Start menu etc.).
Resetting the password
Windows XP has a function to reset a forgotten password.
To use this function, you need to create a password reset disk beforehand following
the steps below.
1
Connect the USB floppy disk drive.
2
Select [start] - [Control Panel] - [User Accounts] and select the account you used
to logon.
3
Select [Prevent a forgotten password] from the [Related Tasks] menu and create a
password reset disk following the on-screen instructions.
Store the password reset disk in a safe place.
Recovery Console
If you install the Recovery Console, you can use the command prompt to execute
operations such as CHKDSK in cases where, for example, Windows XP will not
start. Use the following procedure to install Recovery Console. This procedure al-
lows you to select Recovery Console as a startup option during startup.
1
Select [start] - [Run] and input [c:\windows\i386\winnt32.exe /cmdcons], then
select [OK].
Follow the on-screen instructions.
2
Select [start] - [Run] and input [c:\util\msupdate\q308402\q308402_
wxp_sp1_x86_enu.exe], then select [OK].
Follow the on-screen instructions.
NOTE
Only the logon password for each account can be reset.
The password set in the Setup Utility cannot be reset.
Depending on the Windows settings, installed applications, and drivers, menus and
other displays may differ, or some functions (such as use of the password reset disk)
may be inoperable. Check with your system administrator for details.
Setup the SD-MovieStage
Select [Start]
*
- [Run] and input [c:\util\sdmovie\setup.exe], then select [OK].
*
Windows XP
: [start]
Follow the on-screen instructions.
At [Choose Destination Location], do not change the destination folder.
At [Select the Video System], select [NTSC].
NOTE