![background image](http://html.mh-extra.com/html/panasonic/cf-d1g-series/cf-d1g-series_operating-instructions-manual_264355018.webp)
18
Useful Information
7
Touch top left of the screen while [Panasonic] boot screen is displayed.
The.Setup.Utility.starts.up.
l
. If.the.password.is.requested,.enter.the.Supervisor.Password.
8
Touch [Exit] and double-touch your DVD drive in [Boot Override].
The.computer.will.restart.
9
Click [Reinstall Windows] and click [Next].
10
At the confirmation message, click [YES].
11 At the License Agreement screen, click [Yes, I agree to the provisions above and wish
to continue!] and click [Next].
12
<For MUI OS model>
Click [Next].
If.the.option.is.displayed,.select.the.setting.and.click.[Next].
l
. .[Reinstall.with.HDD.recovery.partition.]
Standard.recovery.method..
You.can.use.recovery.from.Recovery.Partition.
l
. [Reinstall.without.HDD.recovery.partition.]
Increase.usable.HDD.size..
You.can.NOT.use.recovery.from.Recovery.Partition..
When.this.option.is.selected,.you.can.no.longer.create.Recovery.Disc(s).after.the.recovery.operation.
CAUTION
l
. Carefully.choose.above.item.because.you.cannot.change.it.later.
13 Click [Next].
If.the.option.is.displayed,.select.the.setting.and.click.[Next].
l
. [Reinstall.Windows.to.the.System.Disk.to.factory.default.]
Select.this.option.when.you.want.to.install.Windows.to.the.factory.default..After.installation,.you.can.create.a.
new.partition..For.how.to.create.a.new.partition,.refer.to.“To.change.the.partition.structure”.(
è
.page.10).
l
. [Reinstall.to.the.OS.related.partitions.]
*2
Select.this.option.when.the.hard.disk.has.already.been.divided.into.several.partitions..For.how.to.create.a.
new.partition,.refer.to.“To.change.the.partition.structure”.(
è
.page.10).
You.can.keep.the.partition.structure.
*2
.This.does.not.appear.when.[Reinstall.without.HDD.recovery.partition.].is.selected,.or.if.Windows.cannot.be.installed.to.the.
recovery.partition.and.the.area.usable.by.Windows.
14 At the confirmation message, click [YES].
15
<For MUI OS model>
Select language and system type (32bit or 64bit) and click [OK].
At.the.confirmation.message,.click.[OK].
To.cancel.the.recovery.procedure,.click.[CANCEL],.and.click.the.
.mark.that.appears.at.the.top.right.corner.
of.the.screen.
./.
Installation.starts.according.to.the.instructions.on.the.screen..(It.will.take.approximately.30.-.45.minutes..The.
process.may.take.longer.depending.on.the.type.of.the.DVD.drive.used.)
l
. Do.not.interrupt.installation,.for.example.by.turning.off.the.computer.
Otherwise.installation.may.become.unavailable.as.Windows.may.not.start.up.or.the.data.may.be.corrupted.
16 When Ending process screen is displayed, remove the Recovery Disc and DVD Drive
and then click [OK].
Follow.the.on-screen.instructions.
Some.models.may.take.approximately.40.minutes.
17 Perform the “First-time Operation”, starting from step 6, “Setup Windows” (
è
page 9).
NOTE
l
.
.The.date.and.time,.and.the.time.zone.may.not.be.correct..Be.sure.to.set.them.correctly.
18 Start the Setup Utility and change the settings as necessary.
19 Perform Windows Update.
20
<Only for model with TPM> Clear TPM (
è
page 15).
Installing Software