Panasonic CF-C1 Series Reference Manual Download Page 21

Page: 21 / 216

Display Rotation

By using the Display Rotation Tool, you can change the settings of the display rotation.

Click on the notification area and right-click .

Right-click on the notification area.

Click [Setting...].

Change the settings.

A. Changing the angle in the laptop mode

(Default: Keep Angle)

When [Latest Angle] is selected, the screen will be displayed at the
angle used during the last time laptop mode was used.

B. Changing the angle in the tablet mode

(Default: Keep Angle)

When [Latest Angle] is selected, the screen will be displayed at the
angle used during the last time tablet mode was used.

C. Activating/deactivating the confirmation message that allows you to

select whether to turn off wireless WAN when the antenna is placed
close to the user.
• Depending on the model, this item does not appear.

Click [OK].

Changing the Settings

Windows 7

Windows XP

Summary of Contents for CF-C1 Series

























































































































































































































Search results

Summary of Contents for CF-C1 Series

Reviews:

Brands by name

Popular brands

Panasonic CF-C1 Series, Reference Manual

Search results

Summary of Contents for CF-C1 Series

Reviews:

Brands by name

Popular brands