Panasonic CF-AX3 Series Operating Instructions Manual Download

Page: 32 / 56

efu

l In

ati

Installing software will return the computer to the default condition. When you install the soft-

ware, the hard disk data will be erased.

Back up important data to other media or an external hard disk before installation.

CAUTION

If the recovery partition is deleted, you cannot perform hard disk (flash memory) recovery.

To check the Recovery Partition, perform the following methods.

1. Click on the Start screen, and then right-click [This PC] under “Windows System”.

2. Click [Manage] on the app bar.

Click (Start) and right-click [Computer], then click [Manage].

A standard user needs to enter an administrator password.

Click [Disk Management].

Remove everything and reinstall Windows

You can reinstall the OS that was pre-installed at the time of purchase (Windows 8.1 or Windows 7).

Preparation

Change to the laptop mode.

Remove all peripherals.

Connect the AC adaptor and do not remove it until installation is complete.

Perform “Remove everything and reinstall Windows”.

Display “Charm”, and click - [Change PC settings] - [Update and recovery] - [Recovery].

Click [Get Started] under “Remove everything and reinstall Windows”.

Click [Next].

Select the option.

• Just remove my files

Perform the reinstallation of the Windows in a few moments (Approximately 20 min-

utes).

• Fully clean the drive

By fully cleaning, the deleted files can not be recovered easily and the security level

will be increased. The processing time will be longer (Approximately 140 minutes).

Follow the on-screen instructions.

After the reinstallation, the computer will restart.

Do not interrupt installation, for example by turning off the computer or performing other

operation.

Otherwise installation may become unavailable as Windows may not start up or the

data may be corrupted.

Perform the “First-time Operation”, starting from step 6, “Setup Win-

dows” (

page 20).

NOTE

The date and time, and the time zone may not be correct. Be sure to set them correctly.

Perform Windows Update.

Installing Software

CF-AX3mk2_EU_M.indb 32

2013/11/18 12:12:56

Summary of Contents for CF-AX3 Series

























































Search results

Summary of Contents for CF-AX3 Series

Reviews:

Related manuals for CF-AX3 Series

Brands by name

Popular brands

Panasonic CF-AX3 Series, Operating Instructions Manual

Search results

Summary of Contents for CF-AX3 Series

Reviews:

Related manuals for CF-AX3 Series

Brands by name

Popular brands