background image

20

G

et

tin

St

ar

te

d

First-time Operation

  Select language.

 

   Select language and OS 

(32-bit or 64-bit).

  CAUTION 

l

  Carefully choose your language because you cannot change it 

later. If you set a wrong language, you need to reinstall Windows.

 

A

 Select language and click [Next].

Follow the on-screen instructions.

 

A

 Select language and OS (32bit or 64bit) on “Select OS” 

screen and click [OK]. 

The language setting will start by clicking [OK] on the confir-

mation screen. 

You can return to the “Select OS” screen by clicking [Cancel]. 

The language and OS setting will be completed in about 15 

minutes.

B

 When termination screen is displayed, click [OK] to turn off 

the computer.

C

 Turn on the computer.

6  Setup Windows.

Follow the on-screen instructions.

l

 The computer restarts several times. Do not touch the key-

board or touch pad, and wait until the drive indicator   has 

turned off.

l

 After the computer is turned on, the screen remains black or 

unchanged for a while, but this is not a malfunction. Wait for 

a moment until the Windows setup screen appears.

l

 During setup of Windows, use the touch pad and clicking to 

move the cursor and to click an item.

l

 Setup of Windows will take approximately 

 5 / 

 20 minutes.

Go to the next step, confirming each message on the display.

l

 

 Follow the steps below.

„

A

  When “Enable sensors” is displayed, click [Enable this 

sensor].

„

B

  When the [User Account Control] screen is displayed, click 

[Yes].

„

C

  At the [Display Rotation Tool] confirmation screen, click [Yes].

The computer restarts automatically, and the setting is 

enabled.

l

  You can set the Wireless Network after the setup of Windows 

is complete.

 

 If “Get online” is displayed, select “Skip this 

step”.

 

 “Join a wireless network” screen may not appear.

CF-AX3mk2_EU_M.indb   20

2013/11/18   12:12:54

Summary of Contents for CF-AX3 Series

























































Reviews: