![background image](http://html.mh-extra.com/html/panasonic/cf-ax2-series/cf-ax2-series_operating-instructions-manual_270492026.webp)
26
Installing Software
Us
ef
ul Inf
orm
at
ion
D
Click [Restart] of the “Manage the TPM security hardware” screen.
The computer will restart.
E
When “TPM configuration change was requested to ...” is displayed, press
F12
.
The desktop screen appears.
F
When “TPM is ready” appears, click [Close].
1
Turn on the computer, and press
F2
or
Del
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
z
If the [Panasonic] boot screen is not displayed, turn on the computer while holding down
F2
or
Del
.
z
If the password is requested, enter the Supervisor Password.
2
Write down all of the contents of the Setup Utility and press
F9
.
At the confirmation message, select [Yes] and press
Enter
.
3
Press
F10
.
At the confirmation message, select [Yes] and press
Enter
.
The computer will restart.
4
Press
F2
or
Del
while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
z
If the password is requested, enter the Supervisor Password.
5
Select the [Exit] menu, then select [Recovery Partition] and press
Enter
.
6
Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
7
Click [YES].
The License Agreement screen appears.
8
Click [Yes, I agree to the provisions above and wish to continue!] and click [Next].
9
Select the setting and click [Next].
z
[Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to install Windows to the factory default. After installation, you can create a
new partition. For how to create a new partition, refer to “To change the partition structure” (
Î
page 17).
z
[Reinstall to the System and OS partitions.]
*1
Select this option when the hard disk has already been divided into several partitions. For how to create a new
partition, refer to “To change the partition structure” (
Î
page 17).
You can keep the partition structure.
*1
This does not appear if Windows cannot be installed to the recovery partition and the area usable by Windows.
10
At the confirmation message, click [YES].
11
<For MUI OS model>
Select language and OS (32bit or 64bit), then click [OK].
<For localized OS model>
Select OS (32bit or 64bit) and click [OK].
12
At the confirmation message, click [YES].
Installation starts according to the instructions on the screen. (It will take approximately 20 minutes.)
z
Do not interrupt installation, for example by turning off the computer or pressing
Ctrl
+
Alt
+
Del
.
Otherwise installation may become unavailable as Windows may not start up or the data may be corrupted.
13
When Ending process screen is displayed, click [OK] to turn off the computer.
14
Turn on the computer.
z
If the password is requested, enter the Supervisor Password.
15
Perform the “First-time Operation” (
Î
page 15).
16
Start the Setup Utility and change the settings as necessary.
17
Perform Windows Update.
Using Recovery Disc
Use the Recovery Disc in the following conditions.
• You have forgotten the administrator password.
• Installation is not complete. The recovery partition in the hard disk may be broken.
•
To change OS from Windows 7 to Windows 8, or vice versa.
CF-AX2mk1(CPE02709YA)_OI_M.book Page 26 Wednesday, May 22, 2013 11:06 AM