22
Erste Inbetriebnahme
2 Schließen Sie Ihren Computer an eine Steckdose an
A
<Nur für Modell mit Tastaturbasis> Schieben Sie die Abdeckung.
<Für Tablet> Schieben Sie die Abdeckung in Pfeilrichtung und öffnen Sie dann die Abdeckung.
B
Schließen Sie Ihren Computer an eine Steckdose an.
Der Akku wird automatisch geladen.
ACHTUNG
l
Trennen Sie nicht das Netzteil, bis der Vorgang der Erste Inbetriebnahme abgeschlossen ist.
l
Schließen Sie bei der ersten Benutzung des Computers keine Peripheriegeräte (einschließlich eines ang-
eschlossenen LANKabels) mit Ausnahme des Akku und des Netzteils an den Computer an.
l
G
ebrauch des Netzteils
Bei Gewittern kann es zu einem plötzlichen Spannungsabfall kommen. Da dies zu Fehlfunktionen des Com-
puters führen kann, empfehlen wir den Einsatz einer unterbrechungsfreien Stromversorgung (USV), sofern
das Gerät nicht im reinen Akkubetrieb eingesetzt wird.
l
Wenn der Gleichstromstecker nicht am Computer angeschlossen ist ,entfernen Sie das Netzkabel aus Ihrer
Steckdose. Es wird schon dadurch Strom verbraucht, dass das Netzteil nur in einer Steckdose steckt.
1
2
2
2
1
1
2
2
<Für Tablet>
3 Öffnen Sie das Display
<Nur für Modell mit Tastaturbasis>
A
Ziehen Sie den Griff heraus.
l
Wenn Sie den Griff nicht vor dem Öffnen des Displays herausziehen, besteht die Gefahr, dass der
Computer aufgrund des Gewichts des Displays umkippt.
B
Drehen Sie den Schnappriegel (D) in Pfeilrichtung.
C
Halten Sie die Ausnehmungen mit beiden Händen fest und heben Sie das Display leicht an.
D
Halten Sie die Seite des Computers mit einer Hand, und h
eben Sie das Display zum Öffnen an.
ACHTUNG
l
Öffnen Sie das Display nicht weiter als nötig (180° oder mehr), und wenden Sie nicht übertriebenen Druck auf
das LCD an. Öffnen oder schließen Sie den Computer nicht, indem Sie die Kante des LCD-Segments halten.
3
3
4
D
1
2
CPE03283ZA_FM171_OI_Readme_10_7_11L.indb 22
2017/05/25 12:57:45