38
39
Main Menu
(Continued)
FUNCTION setting restrictions
Under the following conditions, “INVALID FUNCTION” is displayed and the settings cannot be set.
Setting
Condition or mode when operation not possible
BLUE ONLY
•
When Y MAP ON
GAMMA SELECT
•
When GPI item is set
WHITE BALANCE
•
When other than VAR1 to VAR3 is selected in COLOR TEMP.
MONO
• When GPI item is set • When Y MAP ON
BLACK MODE
• When NO SIGNAL • When PICTURE ASSIST ON
•
When Y MAP ON
R COLOR
• When [BLUE ONLY ON] is selected • When Y MAP ON
G COLOR
• When [BLUE ONLY ON] is selected • When Y MAP ON
B COLOR
• When [BLUE ONLY ON] is selected • When Y MAP ON
SDI DISPLAY MODE
•
When other than SDI input
ZOOM MODE
•
When other than 4K signal input
ZOOM POSITION
•
When other than 4K signal input
PIXEL TO PIXEL
•
When GPI item is set
•
When other than 1280 × 720p signal input
•
When [INT-SG] is selected
FRAME GRAB
•
When [INT-SG] is selected
•
When [SDI] is selected and SDI DISPLAY MODE is QUAD
•
When NO SIGNAL input
DISPLAY SELECT
•
When SDI DISPLAY MODE is SINGLE
•
When SDI DISPLAY MODE is QUAD and MULTI FUNCTION is ON
MULTI FUNCTION
•
When other than [SDI] is selected
PICTURE ASSIST
•
When other than [SDI] is selected
WFM LINE SELECT
•
When SDI DISPLAY MODE is SINGLE
•
When MULTI FUNCTION is other than ON
•
When WFM LINE SELECT is ALL
LEVEL METER
• When [INT-SG] is selected • When PICTURE ASSIST ON
TIME CODE
•
When other than [SDI] is selected
CLOSED CAPTION
• When DisplayPort/HDMI is selected • When 4K/PC signal input
• When SDI DISPLAY MODE is QUAD • When [INT-SG] is selected
MARKER
• When PICTURE ASSIST ON • PIXEL TO PIXEL
• When MULTI FUNCTION is ON • When PC signal input
•
When [SDI] is selected and SDI DISPLAY MODE is QUAD
FRAME MARKER
•
Refer to “MARKER” above.
OUTER LINE MARKER
•
Refer to “MARKER” above.
FOCUS-IN-RED
• When GPI item is set • When INT-SG is selected
• When BLUE ONLY ON is selected • When Y MAP ON
• When NO SIGNAL input • When MULTI FUNCTION is ON
Y MAP
• When [INT-SG] is selected • When MULTI FUNCTION is ON
ZEBRA
• When Y MAP ON • When [INT-SG] is selected
•
When GPI item is set
Operation items displayed on the screen during FUNCTION button operation
Pressing any of the <FUNCTION1> to <FUNCTION5> buttons displays the operation assigned to the corresponding button as
shown below.
Setting
Display
BLUE ONLY
[BLUE ONLY OFF] → [BLUE ONLY ON]
GAMMA SELECT
[GAMMA2.20] → [GAMMA2.35] → [GAMMA2.40] → [GAMMA2.60] → [GAMMA FILM] →
[GAMMA
.
(MANUAL SET)]
WHITE BALANCE
[WHITE BALANCE VAR1/2/3]
MONO
[MONO OFF] → [MONO ON]
BLACK MODE
[BLACK MODE OFF] → [BLACK MODE ON]
R COLOR
[R COLOR ON] → [R COLOR OFF]
G COLOR
[G COLOR ON] → [G COLOR OFF]
B COLOR
[B COLOR ON] → [B COLOR OFF]