Panasonic BT-4LH310E, Operating Instructions Manual, Page: 17 / 76

16 17
On-screen Display
(Continued)
2.
Turn the rotary knob <PICTURE> to select a menu ([MAIN MENU], [FUNCTION], or [INPUT SELECT]) and press the rotary
knob <PICTURE>.
• For details on how to operate menus, refer to “On-screen Menu Operations” (→ page 20).
[MAIN MENU] [FUNCTION] [INPUT SELECT]
MENU EXIT SEL. RETURN RETURN
MAIN MENU
MARKER
VIDEO CONFIG
MEASURE SETUP
SYSTEM CONFIG
FUNCTION
AUDIO
DISPLAY SETUP
CONTROL
INFORMATION
MENU EXIT SEL. ENTER RETURN RETURN
FUNCTION
F1:
F2:
F3:
F4:
F5:
SETUP
ZOOM MODE OFF
ZOOM MODE
Y MAP
FRAME GRAB
ZEBRA
SDI DISPLAY MODE
USER1
MENU EXIT RETURN RETURN
INPUT SELECT
SDI
DisplayPort
HDMI
INT-SG
Instructions on <MENU> button operations are displayed.
3.
To close a menu, press <MENU>.
• The menu display disappears after approximately 2 minutes of inactivity. (The value shown before the display disappears is con-
firmed as the setting value.)
Picture Adjustment (PICTURE) Menu Display
MENU EXIT SEL. ENTER RETURN
RETURN
PICTURE
SETTING [FACTORY]
PEAKING
PHASE
CHROMA
BRIGHT
CONTRAST
BACKLIGHT
FOCUS-IN-RED
0
30
30
30
60
80
15
A
B
A : The file name called by [SETUP LOAD] or [POWER ON
SETUP] is displayed for [SETTING].
B : When the picture adjustment values ([PEAKING]/
[PHASE]/[CHROMA]/[BRIGHT]/[CONTRAST]/[BACK-
LIGHT]) are changed from the factory defaults, the posi-
tion pointers are displayed in white.
1.
Press the rotary knob <PICTURE> when no menu is
displayed.
• The [PICTURE] (picture adjustment) menu appears.
• For details on how to operate menus, refer to “Picture
Adjustment (PICTURE) Menu” (→page 21).
2.
To close a menu, press <MENU>.
• This display disappears after approximately 10 seconds of
inactivity. (The value shown before the display disappears is
confirmed as the setting value.)
Audio Volume Display
VOLUME 0
1.
Press <RETURN/VOLUME> when no menu is displayed.
• The audio volume bar meter appears.
• For details on how to operate the audio volume, refer to“On-
screen Menu Operations” (→ page 20).
2.
To close a menu, press <MENU>.
• This display disappears after approximately 10 seconds of
inactivity. (The value shown before the display disappears is
confirmed as the setting value.)
FUNCTION Display
USER1
F1 : ZOOM MODE
F2 : Y MAP
F3 : FRAME GRAB
F4 : FOCUS-IN-RED
F5 : MARKER
ZOOM MODE OFF
A
• The display settings can be set from the [FUNCTION] menu.
• When [FUNCTION DISPLAY] (→page 38) is set to [ON1] or
[ON2], press any of the <FUNCTION1> to <FUNCTION5>
buttons to display the status of the item set for FUNCTION.
• If no operation is performed for approximately 2 seconds, the
set value is confirmed and the display disappears.
• "A" indicates the operating status. (→”Operation items dis -
played on the screen during FUNCTION button operation” on
page 39)
• The items assigned to F1 to F5 can be changed in [SETUP]
(→page 38).