3.
Complete each network setup item and click the [Save] button.
•
For further information about each setting of the “Network Settings” page, refer to page 104.
Note
•
By unchecking the “Wait for camera restarting.” checkbox, multiple cameras can be continuously
configured.
IMPORTANT
•
It may take for around 2 minutes to complete to upload the settings to the camera after clicking the
[Save] button. The settings may be invalidated when the LAN cable is disconnected before
completing the upload. In this case, perform the settings again.
•
When using a firewall (including software), allow access to all UDP ports.
Operating Instructions
165
20 Using the CD-ROM
