Panasonic BL-PA100KT Operating Instructions Manual Download Page 2

2

Introduction

Introduction

Thank you for purchasing a Panasonic HD-PLC product.

Main features

Flexible and stable network access anywhere in your home

The BL-PA100 offers the next generation in home networking: high-speed power 
line communication. High-speed internet access and high performance data 
transfers are now available in any room.

Every AC outlet becomes a home network access point

Because HD-PLC technology makes use of the existing electrical wiring in your 
home, there’s no need to run cables between rooms.

Easy to expand

Up to 16 adaptors in all can be used, which means you can add additional adaptors 
whenever you need to add a network connection in another room of the house.

Simple network speed testing

You can confirm the speed of each adaptor's HD-PLC connection by simply 
pressing a button.

Fast, reliable, and secure

With speeds of up to 190 Mbps (PHY rate)

*1

, advanced error correction, and AES 

128-bit encryption, the BL-PA100 provides peace of mind at the speed of light.

For more information about how HD-PLC works, see page 8.

*1

This is the theoretical maximum data transmission speed of the HD-PLC standard. The actual 
maximum data transmission speed is about 70 Mbps for UDP and 42 Mbps for TCP. Results 
may vary depending on electrical conditions, network environment, and other factors. See the 
specifications for more information.

Summary of Contents for BL-PA100KT





















Reviews: