Panasonic BL-PA100A - HD-PLC Ethernet Adaptor, Service Manual

Page: 6 / 41

6
BL-PA100A/BL-PA100KTA
3 Specifications
All specifications are subject to change without notice.
Power Line Communication interface
*1 Results may vary depending on electrical conditions, network environment, and other factors. For information on how trans-
mission speed is measured, access the Panasonic PLC Support Site at:
http://panasonic.co.jp/pcc/products/en/plc/
*2 Using Linux FTP.
*3 Performance may be affected as more adaptors are added to the network.
*4 Connecting more network devices to an adaptor may increase network traffic and affect performance.
LAN interface
User interface
General
HD-PLC interface
*1 This is the theoretical maximum data transmission speed of the HD-PLC standard.
*2 Varies depending on the electrical environment.
Standard HD-PLC
Actual transmission
speed
*1
UDP: Max. 70 Mbps
TCP
*2
: Max. 42 Mbps
Maximum recommended
no. of adaptors per
network
*3
16 (including the master)
Maximum recommended
no. of network devices
connected to an adaptor
*4
8
Standard IEEE 802.3/IEEE 802.3u
Interface 10 Base-T
100 Base-TX
Auto MDI/MDI-X
Protocol IPv4, IPv6, TCP, UDP
Access method CSMA/CD
Indicators PLC (blue, red)
LAN (green, orange)
MASTER (green)
Other Mode Selector ( MASTER or TERMINAL switch)
SETUP button
FACTORY DEFAULT RESET button
Operational environment 0-40
°
C (32-104
°
F)
20%-85% humidity (without condensation)
Dimensions (W x D x H) Approx. 121 mm x 40 mm x 70 mm
(4 3/4” x 1 9/16” x 2 3/4”)
Weight 240 g (0.53 lb.)
Power supply Input 120 V, 60 Hz
Power consumption 4 W
Frequency band 4-28 MHz
Modulation Wavelet OFDM (16 PAM-2 PAM)
Transmission PHY rate
Max. 190 Mbps
*1
Access method CSMA/CA
TDMA
Error correction Reed-Solomon encoder/decoder
Convolutional encoder/Viterbi decoder
Encryption AES 128-bit encryption
Communication distance
Approx. 150 m (490 ft.)
*2