Panasonic BL-PA100A - HD-PLC Ethernet Adaptor Operating Instructions Manual Download

Page: 1 / 32

Introduction

Introduction ................................................................................................ 2

IMPORTANT SAFETY INSTRUCTIONS.................................................... 3

Electrical environment information ............................................................. 4

Security information ................................................................................... 5

Main unit..................................................................................................... 6

Installation

Registration ................................................................................................ 7

Placing the adaptors .................................................................................. 8

Connecting adaptors to network devices ................................................... 9

Useful Information

Testing a terminal’s network speed.......................................................... 10

Understanding the indicators ................................................................... 11

Resetting an adaptor................................................................................ 12

Troubleshooting........................................................................................ 13

Specifications ........................................................................................... 15

FCC and other information....................................................................... 17

Limited warranty ....................................................................................... 27

Customer services ................................................................................... 29

Operating Instructions

HD-PLC Ethernet Adaptor

Power Line Communication

Model No.

BL-PA100A

Add-on Adaptor for BL-PA100KTA

Please read this document before use and save this document for future reference.

IMPORTANT NOTES:

For best results, connect this product directly to a wall outlet.

This product may not function normally in certain electrical environments.
See page 4 for more information.

Table of Contents

BL-PA100A_OI.book Page 1 Thursday, March 16, 2006 4:14 PM

Summary of Contents for BL-PA100A - HD-PLC Ethernet Adaptor

































Search results

Summary of Contents for BL-PA100A - HD-PLC Ethernet Adaptor

Reviews:

Related manuals for BL-PA100A - HD-PLC Ethernet Adaptor

Brands by name

Popular brands

Panasonic BL-PA100A - HD-PLC Ethernet Adaptor, Operating Instructions Manual

Search results

Summary of Contents for BL-PA100A - HD-PLC Ethernet Adaptor

Reviews:

Related manuals for BL-PA100A - HD-PLC Ethernet Adaptor

Brands by name

Popular brands