•
If Security Warning window is displayed to install ActiveX
®
Controls,
click [Yes].
Insert the Setup CD-ROM into the CD-ROM drive of
the PC.
(If the Network Camera Setup window is not displayed automatically,
double-click "Setup.exe" file on the Setup CD-ROM.)
Select the camera to set up and click [Execute].
•
This program searches for the cameras that are connected to the router
and displays the MAC Addresses, IP addresses and Port Numbers.
Click [Automatic Setup (Local Access Only)].
Opens the manuals.
If Adobe® Acrobat® Reader
(English version) is not installed on
your PC, install it from the Adobe
Reader website.
Finishes the Setup Program.
• When searching for multiple cameras, the cameras can be identified with
the MAC Addresses labeled near the Ethernet (LAN) port of the cameras.
Select a camera.
•
The image is a simulated screen image.
Displays the program version, etc.
When the Single Camera page is displayed, the setup
is completed.
5.
Setup the camera.
Sets up the camera.
Click [Camera Setup].
Important
• To avoid any possible problems, temporarily disable any firewall or antivirus software.
• This procedure explains installation of the camera on the same network that your PC is part of.
• Before proceeding, close your web browser.
Notes
• If more than 20 minutes have passed since the camera was turned on, the camera
cannot be set up from the Setup Program. In this situation, restart the camera.
• The Setup Program may not list any cameras due to your firewall or antivirus soft-
ware settings on your PC. If you cannot disable your firewall or antivirus software,
you can set up the camera entering the camera MAC address. See page 12 of the
Installation/Troubleshooting for details.
Note
Check [Every visit to the page] for
"Temporary Internet files" on your web
browser. If it is not checked, the camera
may display old images.
•
Click [Cancel] and go to the last page, if you mount the camera.
Click [Next] to set up the Internet access to the cam-
era and go to step
on the next page.
Enter the user name and password, and click [Save].
The Enter Network Password window is displayed.
Enter the user name and password that were set, and
click [OK].
• For the first time installation or after pressing the Factory Default Reset button,
only [Automatic Setup (Local Access Only)] can be selected. To set up the
camera with Static or DHCP settings, after performing the [Automatic Setup
(Local Access Only)], run the Setup Program again and select [Manual Setup].
To set the Wireless Configuration, check [Enable] and
click [Next>].
•
When [Disable] was selected, skip to step
.
Set the Wireless Configuration according to the
wireless settings of the router and click [Next>].
1. Set the SSID.
Set the name of the wireless network.
2. Select the Communication mode.
They are IEEE Communication modes. Select the same Communication mode as that of
the router to which the camera is connected.
802.11b (IEEE802.11b)
:
Only 802.11b wireless router can be connected.
802.11b/g (IEEE802.11g)
:
Either 802.11b or 802.11g router can be connected.
802.11g exclusive (IEEE802.11g) :
Only 802.11g router can be connected.
3. Select encrypting or not encrypting.
Selecting WEP can encrypt data within the wireless LAN.
WEP:
Encrypting (setting WEP) makes it difficult for unauthorized users to read data
within the wireless LAN, even if they can receive it. To encrypt data, set the same
encryption key to every terminal within the wireless LAN. There are 3 kinds of
encryption key: 64 bit, 128 bit and 152 bit. Security level of encryption increases in
order of length as follows: 64 bit, 128 bit and 152 bit.
No encryption:
select when not using encryption.
4. Set the WEPKey1–4.
Selecting [WEP] at Cipher enables you to set WEPKey1-4. One or all of the four keys
can be set. Check the same key number as set to the router, and set the same key as at
the router.
✽✽✽✽✽✽✽✽✽✽
:
The entered WEPKey will be displayed as "
✽
"s regardless of the key
type selected.
<Example>
HEX, 10 characters 64 bit :
012345abcd
HEX, 26 characters 128 bit :
0123456789abcdef012345abcd
HEX, 32 characters 152 bit :
0123456789abcdef0123456789abcdef
ASCII 5 characters 64 bit
:
012yz
ASCII 13 characters 128 bit:
0123456uvwxyz
ASCII 16 characters 152 bit:
0123456789uvwxyz
•
For more information about wireless setting, see
http://panasonic.co.jp/pcc/products/en/netwkcam/
1
2
3
4
•
The Wireless Configuration can also be set at
in the Setup Page.
(See page 34 of the Operating Instructions in the Setup CD-ROM.)
