![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_specifications_277421002.webp)
http://panasonic.net/pcc/ipcam
BL-C210A
Internet
PC
FTP
transfer
Sensor
Sensor
Router or HUB
TV (VIERA only)
BL-C210A
OFF
ON
Noise threshold
Noise threshold
Detection level exceeding
noise threshold
BOW
WO
W
No noise detected
Noise detected
Data /
Power In
Power
Transfer
Unit
LAN cable*
AC adaptor
AC in
LAN cable
Router
Comparison of data size
Over
reduction
MPEG-4
H.264
-30%
Data size
Data size
58˚ horizontal 45˚ Vertical
Pan: -41
°
to +41
°
, Tilt: -32
°
to +10
°
1/4 inch CMOS Progressive Scan, approx. 320,000 pixel
Fixed (focal range: 0.3 m to
∞
)
F2.8
5–10,000 lx (3–10,000 lx when in Color Night View mode)
Viewing Angle
Pan/Tilt Angle
Sensor Type
Lens focal point
Aperture (F No.)
Illuminance
Network camera
Ethernet (10Base-T/100Base-TX)
Terminal
Network interface
Input (2)
External interface
0˚C to + 40˚C (+32˚F to +104˚F)
20 % to 80%
Operating Temperature
Operating humidity
General
Dimensions(H x W x D) 74mm x 74mm x 91mm
(2 15/16 inches x 2 15/16 inches x 3 9/16 inches)
230 g (1.09lb.)
AC adaptor : input 100 - 240 V AC, Output 9V DC 750mA
AC adaptor: 5.4 W
Weight (only the unit)
Power Supply
Consumption
Feel Safer with Panasonic
*Use a LAN cable that is no more than 30 m (98 feet 5 inches) long
to connect the camera and the power transfer unit.
*Use a LAN cable that is no more than 100 m (328 feet 1 inches) long
to connect the camera and the router.
Alerting Yourself when
Changes Occur
The camera’s built-in microphone collects
peripheral noise and when camera detects the
noise exceeding the threshold it stores the
image captured. This is a newly added function.
Color Night View Mode
*
1
When the subject darkens, the camera
automatically adjusts the brightness to show
you the image. You can see clear, easy-to-view
images even in the dark.
Others
The included Power Transfer Unit supplies
the camera the power through the LAN cable.
It allows you to install the camera anywhere,
like on the ceiling where no power outlet is.
Power supply via LAN cable
View
Connection
Monitor
Capture
It is easy to watch
The adoption of H.264/ACV has enabled
reduction of data volume by more than 30%
compared to MPEG-4 when transmitting
data of the same image quality.
*Use a LAN cable that is no more than 30 m (98 feet 5 inches) long
to connect the camera and the power transfer unit.
*Compatible Panasonic VIERA TVs
The camera is compatible with the following Panasonic VIERA TVs.
G10 series, G15 series, V10 series, Z1 series
*1 Privacy mode allows you to protect your privacy by hiding the lens
inside the camera.
*2 See 1.1 Understanding the Camera Indicator in the Troubleshooting
Guide on the CD-ROM for indicator meaning.
Stand/Tripod
Mounting Hole
DATA /
POWER IN
FACTORY DEFAULT
RESET button
External INPUT
interface
Built-in sensor
(pyroelectric
infrared sensor)
Power
Indicator*
2
Speaker
PRIVACY button*
1
Lens
AV LINK
indicator
Part Names
Rear View
BL-C210A
Front View
Microphone
Data transmission / H.264 adopted
Sensors and switches can be
connected to the camera through two
external Input ports.
External Input
The camera can be connected to a TV (VIERA
only) and the image can be viewed on the
TV’s monitor. The camera can be operated
through the TV’s remote control, making it
simple even for those not used to computers.
Full Screen Display
Normal mode
Full screen
mode
The monitoring image is easier to see because
it fills the entire screen.
Specifications
[BL-C210A]
*1 H.264 and MPEG-4 cannot browse at the same time.
*2 The frame rate may slow down depending on the network
environment, PC performance, image quality, memory
recording, when color night view mode is activated, etc.
*3 The camera supports POP Before SMTP Authentication and
SMTP Authentication. PLAIN, LOGIN, and CRAM-MD5 SMTP
Authentication are supported. SSL supports SMTP over SSL.
STARTTLS is not supported.
Design and specifications are subject
to change without notice.
All pictures simulated.
0911
BL-C2100907
Image compression*
1
Video resolution
User access limit
Buffered images
Image transfer method
Server
H.264, MPEG-4, Motion JPEG for moving image display
H.264: 640 x 480, 320 x 240
MPEG-4: 640 x 480, 320 x 240, 192 x 144
JPEG: 640 x 480, 320 x 240, 192 x 144
Max. 30 frames/sec. (640 x 480, 320 x 240, 192 x144)
User ID / Password/SSL
2/H.264, 4/MPEG-4, 10/MotionJPEG
SMTP*
3
, FTP, HTTP
Timer, Sensor, Alarm 1, Alarm 2, Motion Detection,
Sound Detection
IPv4 / IPv6 Dual-Stack
IPv4: TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS,
ARP, ICMP, POP3, NTP, UPnPTM, Auto IP,
SMTP Authentication, RTP, RTSP, RTCP
IPv6: TCP, UDP, IP, HTTP, FTP, SMTP, DNS, ICMPv6,
POP3, NDP, NTP, RTP, RTSP, RTCP
Supported protocols
Image buffer/
transfer triggers
Frame rate*
2
Security
Approx. 1160 images (320 x 240)
-Standard image quality -with time display
*1 The image tends to blur more than that in standard mode when
viewing a moving subject in low light. When viewing a dark
subject in color night view mode, spots of white or colored light
may appear in the image. Some subjects may require additional
time for focusing with the auto focus function.