5. Before returning the serviced equipment to the customer, make the
following insulation resistance test to prevent a shock hazard.
3.2. BATTERY CAUTION
Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to following caution:
Disposal of lithium batteries should be performed by permitted, professional disposal firms
knowledgeable in state government federal and local hazardous materials and hazardous waste
transportation and disposal requirements.
A battery continues to have no transportation limitations as long as it is separated to prevent short
circuits and packed in strong packaging.
Commercial firms that dispose of any quantity of lithium cells should have a mechanism in place to
account for their ultimate disposition. This is a good practice for all types of commercial or industrial
waste.
When the lithium battery is exchanged, the clock settings are cleared. In this case, make clock settings
again.
Recommend Type Number:
BR-2032-1VC (BAT401) Manufactured by MATSUSHITA
3.3. TRADEMARKS
- Adobe, Acrobat and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
- Ethernet is either a registered trademark or a trademark of Xerox
Corporation in the United States and/or other countries.
- Microsoft, Windows and ActiveX are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
- Pentium is a trademark or registered trademark of Intel Corporation or
its subsidiaries in the United States and other countries.
- SD mark is a trademark of the SD Card Association.
- Screen shots reprinted with permission from Microsoft Corporation.
- All other trademarks identified herein are the property of their respective
owners.
3.4. INSULATION RESISTANCE TEST
1. Unplug the AC power cord and short the two prongs of the plug with a
jumper wire.
2. Measure the resistance value with ohmmeter between the jumpered AC
plug and each exposed metal cabinet part, such as screw threads, etc.
8
Summary of Contents for BB-HCM371A - Outdoor Wireless Network Camera
